Sound Control - Panasonic CQ-C7105U Operating Instructions Manual

Sound Control

The equalizer curve is selectable from among preset 6
types (FLAT, ROCK, POP, VOCAL, JAZZ, and CLUB)
depending on your listening category.
SQ changeover
The SQ category is changed every time [SQ] (Sound
Quality) is pressed.
Note: Setting of SQ, bass/treble and volume are
influenced one another. If the influence mentioned above
causes distortion to the audio signal, readjust bass/treble
or volume.
SQ is adjustable in accordance with your taste.
1
Hold down [SQ] (Sound Quality) for 2
sec. or more to display "SOUND
QUALITY MENU".
2
Press [PUSH SEL].
The targeted SQ preset appears.
For using the remote control, use [BAND] (SET).
3
Adjust each band.
Band: 60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz)
[]] [[] : Band selection
q w :
"USER" appears in the category name after
adjustment.
Note: If [PUSH SEL] is held down for 2 sec. or
more on the "SQ ADJUSTMENT" display, the preset
data that is called up can be turned into the default.
4
Press [PUSH SEL].
The screen of Step 1 appears again.
For using the remote control, use [BAND] (SET).
5
Press [DISP: DISPLAY].
The regular screen appears again.
18
CQ-C7205U/C7105U
(a page 28)
Level up/down
Lights when SQ is activated.