Recording To A Cassette Tape - Sharp CD-ES111H Operation Manual

CD-ES111H
ENGLISH
E-19
Downloaded From DvDPlayer-Manual.com Sharp Manuals
Recording to a cassette tape (continued)
To perform programmed recording:
1 Programme discs and tracks. (See page 14.)
2 Press the REC PAUSE (TAPE-2 ) button.
3 Press the / button.
To interrupt recording:
Press the REC PAUSE (TAPE-2 ) button.
Recording is paused, but CD playback will continue.
To resume recording, press the / button.
To stop recording:
Press the button.
The CD and tape will stop.
Note:
Whilst recording, OPEN/CLOSE button is deactivated. It is recom-
mended to perform CD recording after closing the disc tray.
Recording from the radio
1
Tune in to the desired station. (See page 15.)
2
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
4
Press the / button to start recording.
To interrupt recording:
Press the REC PAUSE (TAPE-2 ) button.
To resume recording, press the / button.
To stop recording:
Press the button.
Note:
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
03/10/29 CD-ES111H(H)E.fm TINSZA004SJZZ