Enhancing Your System - Sharp CD-ES111H Operation Manual

Enhancing your system

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
Downloaded From DvDPlayer-Manual.com Sharp Manuals
VCR, DVD, etc.
To the line
output sockets
White
Red
RCA lead
(not supplied)
Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
Red White
Note:
To prevent noise interference, place the unit away from the televi-
sion.
To record on a tape
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE (TAPE-2
4
Press the / button.
5
Play the VCR, DVD, etc.
Headphones
Before plugging in or unplugging the headphones, reduce the vol-
ume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
are between 16 ohms and 50 ohms impedance. The recommend-
ed impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME buttons.
03/10/29 CD-ES111H(H)E.fm
CD-ES111H
ENGLISH
) button.
E-24
TINSZA004SJZZ
8