Dpof Setting - Panasonic AG-HMC70P Operating Instructions Manual

DPOF setting

This is for writing the printing data on
an SD card.
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
Rotate the mode dial to select
¬
and then select the
playback) tab.
1
Press the MENU button, then
select [PLAY SETUP]
[DPOF SET]
#
the center of the cursor button.
2
Select the file to be set and then
press the center of the cursor
button.
The number of prints set to be in DPOF is
displayed.
3
Move the cursor button up or
down to select the number of
prints, then press the center of
the cursor button.
≥You can select from 0 to 999. (The selected
number of pictures can be printed with the
printer supporting DPOF.)
≥To cancel the setting, set the number of
prints to [0].
≥You can also select multiple files in
succession.
(still picture
#
[SET] and press
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select
[PLAY SETUP] # [DPOF SET] #
[CANCEL ALL] and press the center of the
cursor button.
≥When the confirmation message appears,
select [YES], then press the center of the
cursor button.
ª What is DPOF?
DPOF stands for Digital Print Order Format. This
enables picture printing information to be written
onto an SD card so that it can be used on a
system supporting DPOF.
≥The DPOF setting can be established for up to
999 prints.
≥DPOF setting made on other devices may not
be recognized by this unit. Please perform the
DPOF settings on this unit.
≥You cannot add the recording date to pictures
to be printed with the DPOF settings.
Editing
77