White Balance - Panasonic AG-HMC70P Operating Instructions Manual

White balance

This is for recording in natural colors.
The automatic white balance function may not
reproduce natural colors depending on the
scenes or lighting conditions. If so, you can
adjust the white balance manually.
Rotate the mode dial to select
¬
1
Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2
Push the up button of the cursor
button to select [
3
Push the left or right button of
the cursor button to select the
white balance mode.
[ ]: Auto white balance adjustment
AWB
[ ]: Indoor mode (for recording under
incandescent lamps)
≥Incandescent lights, halogen lamps
[ ]: Outdoor mode
≥Outdoors under a clear sky
[ ]: Manual adjustment mode
≥Mercury-vapor lamps, sodium lamps,
some fluorescent lights
.
2/2 2/2 2/2
].
2/2 2/2 2/2
≥Lights used for wedding receptions at
hotels, stage spotlights in theatres
≥Sunrise, sunset etc.
To restore to the automatic adjustment
Set the white balance mode to [
≥You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
To set the white balance manually
1
Select [ ], fill the screen with a
white subject.
2
Push the up button of the cursor
button to select [
≥When the [ ] display changes from
flashing to on, setting is complete.
≥When the [ ] display continues flashing,
the white balance cannot be set because
the place is dark etc. In this case, use the
automatic white balance.
Recording
].
AWB
].
63