Quick Start; Image Stabilizer Function - Panasonic SDR-H40P/PC Operating Instructions Manual

Quick start

This unit will resume recording/pause mode
about 1.7 seconds after the LCD monitor is
reopened.
≥ When in quick start standby mode about
60% of the power used in recording pause
mode is being consumed, so the recording
time will be reduced.
¬ Rotate the mode dial to select
.
1
Select the menu. (l 28)
[SETUP] # [QUICK START] # [ON]
2
Close the LCD monitor while the
mode dial is set to
The status indicator A flashes green and the unit
goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator A lights red and the unit is
put into recording pause approx. 1.7 seconds
after it is turned on.
To cancel Quick start
Select [SETUP] # [QUICK START] # [OFF]
≥ The default setting is on.
≥ Quick start standby mode is canceled if
jabout 5 minutes elapsed
jthe mode dial is switched
jthe battery is removed or the AC adaptor is
disconnected
≥ In the quick start mode it may take some time
for automatic white balance to adjust, if the
scene being recorded has a light source
42
LSQT1337
≥ In the quick start mode, the zoom
≥ If [POWER SAVE] (l 29) is set to
or

Image stabilizer function

Reduces the image shaking (jitter) due to hand
movement when recording.
or .
¬ Rotate the mode dial to select
Press the O.I.S. button.
A
The image stabilizer icon [
To cancel the image stabilizer function
Press the O.I.S. button again.
≥ The default setting is on.
≥ In the following cases, the image stabilizer
A
different from the scene last recorded. (When
the MagicPix function is used, however, the
white balance of the scene last recorded is
retained.)
magnification becomes 2k and the picture size
may differ from what it was before quick start
standby mode.
[5 MINUTES] and the unit automatically goes
into quick start standby mode, close the LCD
monitor and then open it again.
.
function may not work effectively.
jWhen the digital zoom is used
jWhen the unit is shaken greatly
jWhen you record a moving subject while
tracking it
or
O.I.S.
] appears.