Security Mode - Panasonic PV-L751 Operating Instructions Manual

Recording starts automatically if motion is
detected.
2 3 4
, ,
1
Motion Security may mistakenly start
when:
• background is plain, like a white wall, or
has distinct vertical, horizontal, or
slanted stripes, like a venetian blind.
• brightness suddenly changes.
Motion Security may not start when:
• motion is very slow or fast.
• moving object is very small.
• motion occurs only in 1 corner of
viewing area.
• in poor lighting (in this case, MOTION
SECURITY flashes).
• background is plain, like a white wall, or
has distinct horizontal or vertical stripes.
Note:
• Security recording starts if Camcorder is
bumped or repositioned.
• This feature is not available during normal
recording.
• While in Motion Security stand-by, the
following functions are not available:
Record/Pause, Stand-by mode, Digital
E.I.S., Video Effects (Auto/Digital Fade,
Digital Filter).
FAR FAR
UP
FOCUS FOCUS
DOWN
NEAR NEAR
DISPLAY MENU

Security Mode

Before you begin...
• Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
• Insert cassette with record tab (page 11).
• Set POWER to CAMERA.
• Securely position and aim Camcorder.
1
Slide DIGITAL SELECT to EIS.
2
Press MENU for
MENU mode.
Press UP or
DOWN to select
SECURITY .
3
Press DISPLAY to select ON.
4
Press MENU for Motion Security stand-
by mode. (If cassette is not inserted,
" " will flash.)
MOTION
SECURITY
STAND-BY STAND-BY
• Recording will start about 3 seconds
after motion is detected.
• Date and time are recorded if
displayed in EVF or LCD monitor
(page 16).
• Recording stops about 30 seconds
after motion ceases.
To cancel Security Mode, set POWER to
OFF.
PAGE 2/2 2/2
DISPLAY ; ON
SELF DEMO ; OFF
SECURI RITY ; OFF
VIDEO EFFECTS ; FADE FADE
BLACK
SELECT : PUSH / KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
REC REC
MOTION
SECURITY
31