Recording With The Built-In Led Video Light - Panasonic Palmcorder PV-GS83 Operating Instructions Manual

Recording with the built-in LED
video light
Gain up mode works with the built-in LED video
light to enhance the light's brightness and
brighten the natural colors in a scene.
1
Press the [LIGHT] button. 1
≥The built-in LED video light lights up and the
gain up mode is set to on.
≥The gain up mode will be brighter than when
only the LED video light is on, but washed out
images will appear.
2
Press the [LIGHT] button. 2
≥The gain up mode is set to off.
≥To eliminate washed out images, use this
mode.
3
Press the [LIGHT] button. 3
≥The LED video light turns off.
≥Pressing the [LIGHT] button again returns to
1.
1
2
3
≥The subject should be within 1.5 metres
(4.9 feet) of the Camcorder.
≥Using the LED video light reduces battery time.
≥Set the LED video light to off when not in use.
≥Do not look directly into the light.
≥Using the MagicPix function at the same time
will make conditions even brighter.
≥The LED video light enables simply lightening
the images taken in a dimly-lit place. We also
recommend using it in a bright place to obtain
high quality images.
24
LSQT1181
Before using
LIGHT
+