Manual Focus Adjustment - Panasonic Palmcorder PV-GS83 Operating Instructions Manual

ª
To set the white balance manually
Select [ ] in Step 3. Then, while viewing a white
subject on the entire screen, move the joystick up
to select the [ ] indication.
≥The white balance is set when the [
indication stops flashing.
ª About flashing of the [
When the manual adjustment mode is
selected
≥Flashing indicates that the white balance
previously adjusted is stored. This setting is
stored until the white balance is adjusted again.
When white balance cannot be set in the
manual adjustment mode
≥White balance may not be adjusted properly in
the manual adjustment mode in dark places. If
required, use the auto white balance mode.
Setting in the manual adjustment mode
≥When the setting is completed, it will keep lit.
ª
About the white balance sensor
The white balance sensor detects the type of light
source during recording.
≥Do not cover the white balance sensor during
recording or it may not function properly.
36
LSQT1181
Record mode

Manual focus adjustment

If auto focusing is difficult due to the conditions,
then manual focusing is available.
≥Set to Tape/Card Recording Mode.
]
1
] indication
2
≥The [
3
≥When focused with a wide angle, the subject
ª
Set the [AUTO/MANUAL/FOCUS] switch to
[AUTO] or [FOCUS].
Set the [AUTO/MANUAL/FOCUS] switch to
[MANUAL].
Set the [AUTO/MANUAL/FOCUS] switch to
[FOCUS].
MF MF MNL
] indication and the manual focus [MF]
MNL
indication appears.
Move the joystick left or right in order to
adjust the focus.
MF MF MNL
may not be in focus when zoomed in. First,
zoom in on the subject and then focus on it.
To restore to the automatic
adjustment