Brother MFC-8460N Quick Setup Manual page 24

Step 2
For Network Interface Cable Users
(For Windows
8
When the Brother MFL-Pro Suite Software
License Agreement window appears, read
the agreement, then click Yes if you agree
to its terms.
9
Choose Network Connection and then
click Next.
If you want to install the PS driver (Brother's
BR-Script Driver), choose Custom Install and
then follow the on-screen instructions. When
the Select Components screen appears,
check PS Printer Driver, and then continue
following the on-screen instructions.
0
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
DO NOT try to cancel any of the
screens during this installation.
A
If the machine is configured for your
network, select your machine from the list
and then click Next.
22
Installing the Drivers & Software
®
98/98SE/Me/NT/2000 Professional/XP/XP Professional x64 Edition)
This window will not appear if there is only one
of this Brother model connected on the
network, it will be selected automatically.
B
If the machine is not yet configured for use
on your network, the following screen
appears.
Click OK. The Configure IP Address
window will appear. Enter the IP address
information appropriate to your network by
following the on-screen instructions.
C
Click Finish to restart your computer.
®
(For Windows 2000 Professional/XP/
XP Professional x64 Edition/
®
Windows NT 4.0, you must be logged on
with Administrator rights.)
The MFL-Pro Suite (including Brother
Network Printer driver and Network
Scanner driver) has been installed and
the installation is now complete.
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation
results window will be shown. If the
Installation Diagnostics shows a failure,
please follow the on-screen instruction or read
on-line help and FAQ's in
Start/All Programs (Programs)/Brother/
MFL-Pro Suite MFC-XXXX (where XXXX is
your model name).