Auto Shutter - Panasonic PV-DV202 Operating Instructions Manual

Digital palmcorder multicam camcorder
Hide thumbs Also See for PV-DV202:
Table of Contents

Advertisement

Advanced Settings
High Speed Shutter
To record high speed motion (e.g. tennis
stroke) with improved STILL or SLOW
MOTION playback when watching the tape
on this Palmcorder.

Auto Shutter

In the AUTO mode (no indication in the EVF and LCD monitor), the Palmcorder will
automatically adjust the shutter speed (up to 1/350).
• AUTO mode is automatically selected whenever the POWER Switch is set to CAMERA.
Manual Selection
3, 4
JOG KEY
1
POWER
2
AUTO/MANUAL
Note
• For proper color reproduction, it is
recommended that you use this feature
outdoors. For indoor High Speed Shutter
recording, additional halogen or tungsten
light should be provided. Fluorescent light
will degrade the picture quality.
• This feature requires ample light. More
light is required for the fastest shutter
speeds.
• The Auto Focus system may not operate
properly in insufficient light when using
the High Speed Shutter.
• When PROG.AE is ON, you cannot
manually select the shutter speed.
• When MagicVu (PV-DV402 only) is ON,
Program AE and H.S.S. cannot
manually select the shutter speed.
• When MagicPix is ON, H.S.S. cannot
manually select the shutter speed.
30
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
1
Set POWER to CAMERA.
2
Hold down AUTO/MANUAL for more
than 0.7 seconds so that the "MNL"
indication appears in the EVF or the
LCD monitor.
3
Press JOG KEY repeatedly to display
the shutter speed.
4
Rotate JOG KEY to choose one of the
following shutter speeds.
• Hold down AUTO/MANUAL for more
than 0.7 seconds to cancel the setting.
EVF/LCD

Advertisement

Table of Contents
loading

This manual is also suitable for:

Palmcorder pv-dv402Palmcorder pv-dv202

Table of Contents