Panasonic PV-DV202 Operating Instructions Manual page 82

Web Camera
For Windows 2000 users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "Found New Hardware" is displayed.
• "CONNECT WITH PC" and "WEB CAM" are displayed in the EVF and LCD monitor.
A gray box is also displayed. The image within the box can be used with
communication.
• Place the Palmcorder so that you are in the picture.
• To confirm if the connection between the Palmcorder and PC is correct, please refer
to "Tuning Wizard" on page 84.
• When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed.
Even so, functionality confirmation has been performed at our manufacturer.
Click [Yes] and proceed.
4
Go to step 5 below.
For Windows 98SE/Me users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CONNECT WITH PC" and "WEB CAM" are displayed in the EVF and LCD monitor.
A gray box is also displayed. The image within the box can be used with
communication.
• Place the Palmcorder so that you are in the picture.
• To confirm if the connection between the Palmcorder and PC is correct, please refer
to "Tuning Wizard" on page 84.
Note
• When connecting for the first time using Windows 98SE or Me, the OS installation
CD may be required.
4
Go to step 5 below.
5
Connect the A/V Cable (supplied) to the Audio Adaptor (supplied).
• For PCs with no built-in mic, connecting the A/V Cable (supplied) to the Audio
Adaptor (supplied), the Palmcorder replaces the mic.
• If the speaker and mic are in close proximity, howling may occur.
Note
• Do not disconnect the USB Cable while in use.
This could be a source of trouble. For more details, please read the respective Help
file.
82
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com