Panasonic PV-DV202 Operating Instructions Manual page 59

PHOTOVU/MPEG4 Movie Messenger™ System
For Windows 2000 users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CAPTURE" appears in the EVF or the LCD monitor.
• The "Found New Hardware" screen of Windows is displayed.
• When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed. Even so, functionality confirmation has
been performed at our manufacturer.
Click [Yes] and proceed.
Note
• For extended use, the AC Adaptor should be used as a power source.
For Windows 98SE/Me users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CAPTURE" appears in the EVF or the LCD monitor.
Note
• For extended use, the AC Adaptor should be used as a power source.
59