Notes On Operations - Panasonic PV-DV202 Operating Instructions Manual

Notes On Operations

Replacing the Bulb
1
Insert a rigid wire, such as an
extended paper clip into point (A)
and lift cover up.
2
Using Tweezers or needle-nose
pliers, carefully remove bulb.
• Take unit to servicenter if you need
assistance.
DANGER:
Use only replacement bulb (PART NO. LSLL0028) supplied by Panasonic to reduce risk
of fire. Handle new bulb with cloth or tissue as skin oils decrease bulb life. Remove lens
cover and allow bulb to cool before replacing to avoid possible burn hazard.
Notice
This product has a fluorescent lamp that contains a small amount of mercury. It also
contains lead in some components. Disposal of these materials may be regulated in
your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance:
<http://www.eiae.org.>
Concerning the Memory Card
(MultiMediaCard and SD Memory Card)
• Model PV-DV202/PV-DV402 can be used with either a MultiMediaCard or a SD
Memory Card.
• Both of these exterior Memory Cards (MultiMediaCard and SD Memory Card) are
lightweight and removable.
• Both Memory Cards (MultiMediaCard and SD Memory Card) are offered in a variety of
memory sizes, so you can purchase a higher capacity Memory Card if desired.
94
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Before you begin
• Set POWER to OFF.
3
Replace bulb using a clean cloth or
tissue. (Do not touch with fingers.)
(A)
4
Replace lens cover.
Note
• Handle bulb gently. Excessive force may
cause bulb to crack.