Download
Share
Print this page
Makita BTD136 Technical Information
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. BTD136
  6. Technical information
Makita BTD136 Technical Information

Makita BTD136 Technical Information

Hide thumbs Also See for BTD136:

Advertisement

Quick Links

Download this manual See also: Instruction Manual
T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Model BTD136 Cordless Impact Driver is an advanced version of
model BTD133, featuring enhanced dust and drip-proof performance
with a compact body (overall length: 129mm), additionally to
the same
motor (BrushLess DC motor) and electronic 3-stage
BLDC
impact power settings with variable power control in each range
as BTD133.
This product is powered by 14.4V- 1.3Ah/ 3.0Ah Li-ion batteries
BL1415/ BL1430.
This product is available in the following variations.
Model No.
type
BTD136Z
No
BTD136RFE
BL1430
BTD136SHE
BL1415
---
No
---
BL1430
S
pecification
Voltage: V
Capacity: Ah
Energy capacity: Wh
Battery
Cell
Charging time (approx.): min.
Max output (W)
Driving shank
Machine screw
Standard bolt
Capacities
High tensile bolt
Coarse-thread
Impact power selection
Impacts per min.: min.
No load speed: min.
¹=rpm
ˉ
Max. fastening torque
Electric brake
Variable speed control by trigger
Reverse switch
LED job light
Weight according to EPTA-Procedure 01/2003: kg (lbs)
*
for North and Central American countries
4
*
The fastening torque at 3 seconds after seating, when fastening M14 (grade 10.9) high tensile bolt.
5
S
tandard equipment
See the model variation list above.
Note: The standard equipment for the tool shown above may vary by country.
O
ptional accessories
Phillips bits
Socket bits
Drill chucks
Drill bits with 6.35mm Hex shank
Hole saws for Impact driver
Bit piece
Stopper for Impact driver
BTD136
Cordless Impact Driver
Battery
Battery
Charger
cover
quantity
No
No
No
2
1
DC18RC
2
1
DC18SD
No
No
No
2
1
DC18RA
¹=ipm
Hard/ Medium/ Soft
ˉ
Hard/ Medium/ Soft
: N.m [kgf.cm] (in.lbs)
*5
Hook set (Belt clip)
Tool catcher set
Battery protectors
Li-ion Battery BL1430
Li-ion Battery BL1415
Charger DC18SD
Charger DC24SC
Plastic
Belt
carrying case
clip
No
Yes
Yes
Yes
No
Yes
14.4V
1.3/ 3.0
19/ 44
Li-ion
15/ 22 with DC18RC (DC18RA
210
6.35mm (1/4") Hex
M4 - M8 (5/32 - 5/16")
M5 - M14 (3/16 - 9/16")
M5 - M12 (3/16 - 1/2")
22 - 125mm (7/8 - 4-7/8")
Electronic 3 stage (Hard/ Medium/ Soft)
+ Teks screw mode
0 - 3,200/ 2,600/ 1,100
0 - 2,600/ 2,100/ 1,200
165 [1,680] (1,460)
Yes
Yes
Yes
Yes
1.2 (2.6)/ 1.4 (3.1)
Fast charger DC18RA
(for USA, Canada, Guam, Panama, Colombia, Mexico)
Fast charger DC18RC
(for all countries except the countries above)
Automotive charger DC18SE
Automatic refreshing adapter ADP03
OFFICIAL USE
for ASC & Sales Shop
PRODUCT
P 1/13
H
W
Dimensions: mm (")
Length (L) 129 (5-1/8)
Width (W)
79 (3-1/8)
221 (8-3/4)*
2
Height (H)
239 (9-3/8)*
3
*
: with Battery BL1415
2
*
: with Battery BL1430
3
)
*4

Advertisement

loading

Related Manuals for Makita BTD136

Summary of Contents for Makita BTD136

  • Page 1 BTD136 Description Cordless Impact Driver ONCEPT AND MAIN APPLICATIONS Model BTD136 Cordless Impact Driver is an advanced version of model BTD133, featuring enhanced dust and drip-proof performance with a compact body (overall length: 129mm), additionally to the same motor (BrushLess DC motor) and electronic 3-stage...

  • Page 2: Sleeve

    Disassembling/assembling Hammer case 134848-9 Socket 32-50 Disassembling/assembling Hammer case [2] LUBRICATION Apply Makita grease FA No.2 and N No.2 to the following portions indicated by the black triangle to protect parts and product from unusual abrasion. Item Description Portion to lubricate...

  • Page 3: Separate Housing (R) From Housing (L), Then Remove Hammer Case Section From Motor Section. (Fig

    P 3/13 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Hammer Case Section DISASSEMBLING (1) Remove Bumper and Hammer case cover. (Fig. 2) Fig. 2 1. Remove Bumper, then remove the claws of Hammer 2. Hammer case cover can now be removed case cover from the groove of Hammer case complete. from Hammer case complete.

  • Page 4: Hammer Case

    P 4/13 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Hammer Case Section DISASSEMBLING (4) Hammer case section can now be disassembled as shown in Fig. 5. Fig. 5 Bearing box Hammer case complete complete Hammering mechanism Internal gear 51 O Ring 40 ASSEMBLING (1) Assemble Hammer case section.

  • Page 5: Hammer Case

    P 5/13 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Hammer Case Section ASSEMBLING (3) Assemble Bumper to the machine. (Fig. 10) Fig. 10 Hammer case cover Bumper Mount Bumper to Hammer case cover by engaging four inner projections hole inner projection with four corresponding holes, and two inner notches claw with two corresponding claws.

  • Page 6: Hammer Case

    P 6/13 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Rotor ASSEMBLING (1) Assemble Baffle plate to Stator complete as shown in Fig. 14. Fig. 14 Baffle plate protrusion Wire connecting plate Stator complete (2) Assemble Rotor as illustrated in Fig. 15. Fig. 15 1.

  • Page 7: Hammer Case

    P 7/13 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Mounting Hammer case section and Motor section to Housing (L) ASSEMBLING Follow the instructions in Fig. 17 when mounting Hammer case section and Motor section to Housing (L). Fig. 17 Make sure that the ribs of Housing (L) is Baffle plate fitted tightly in the groove of Baffle plate.

  • Page 8: Table Of Contents

    P 8/13 epair [3] DISASSEMBLY/ASSEMBLY [3]-5 Bit Holder Section and Anvil DISASSEMBLING (1) Remove Bumper and Hammer case cover from the machine. (Fig. 2) (2) Separate Housing (R) from Housing (L), then remove Hammer case section from Motor section. (Fig. 3) (3) Remove Bearing box complete from Hammer case complete.

  • Page 9: Flat Washer

    P 9/13 epair [3] DISASSEMBLY/ASSEMBLY [3] -6. Hammer Section DISASSEMBLING (1) Take out Hammer case section. (Figs. 2 and 3) (2) Remove Bearing box complete. (Fig. 4) (3) Remove Internal gear 51 and Hammer section. (Fig. 5) (4) Disassemble Hammer section. (Figs. 22, 23, 24 and 25) Fig.
  • Page 10 P 10/13 epair [3] DISASSEMBLY/ASSEMBLY [3] -6. Hammer Section ASSEMBLING Assemble in the reverse order of disassembly. (Figs. 25, 24, 23 and 22) Note in Assembling: Before putting Flat washer 24 in Hammer (Fig. 25), make sure that twenty-four Steel balls 3.5 are put in the groove of Hammer as shown in Fig.
  • Page 11 P 11/13 ircuit diagram Fig. D-1 Color index of lead wires' sheath Black Orange White Blue Gray Yellow circuit Sponge Stator Switch Connector Connector Sponge This Lead wire is red for some countries instead of white. Fuse Terminal...
  • Page 12 P 12/13 iring diagram Fig. D-2 [1] Wiring of Lead Wires from LED Light Circuit Fix lead wires from LED light circuit in the three Lead wire holders because they must be tight in this place. LED light circuit Put sponge A bundling lead wires from LED light circuit in the place where the extended line from rib C can cross sponge A.
  • Page 13 P 13/13 iring diagram Fig. D-4 Wiring in Housing (L) Put the slack of Stator’s lead wires in this place. Be careful not to put Lead wires on this rib. sponges B and C Switch extended line from the upper edge of seal upper edge of seal Put sponges B and C bundling lead wires from LED light circuit...

This manual is also suitable for:

Btd147zBtd147rfeBtd147she