Recording Still Pictures Onto A Card (Photoshot) - Panasonic Palmcorder PV-GS180 Operating Instructions Manual

Recording still pictures onto a card
(Photoshot)
≥Set to Card Recording Mode.
1
Press the [PHOTO SHOT] button halfway in
order to adjust focusing. (For auto focusing
only)
≥The iris/gain value is fixed and this
Camcorder focuses on the subject
automatically.
1
2
1
Shutter chance mark
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark: When focusing is unsuccessful
≥The shutter chance mark is indicated as follows
when the [PHOTO SHOT] button is not pressed
halfway. Please use it as a guide for recording.
¥ (The green lamp lights up.):
When in focus and a good picture
can be recorded
± (The white lamp lights up.):
Almost in focus
2
Focus area
2
Press the [PHOTO SHOT] button fully.
ª To record still pictures clearly
≥When zooming in on the subject with a
magnification of 4k to 10k or higher, it is
difficult to reduce the slight shaking from holding
the Camcorder by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥When recording still pictures, hold the
Camcorder firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
≥You can record stable pictures without shaking
by using a tripod and the remote control.
Record mode
PHOTO
SHOT
≥For the number of still pictures to be recorded
on a card, refer to
-74-
≥The sound cannot be recorded.
≥While data is being recorded on a card, do not
operate the mode dial.
≥When the access lamp is lit, do not insert or
remove a card.
≥Another product may degrade or not play back
data recorded on this Camcorder.
≥If set [PICT. QUALITY] >> [
noise may appear on a playback image
depending on the picture content.
≥When the [PICTURE SIZE] is set to other than
[640], the mega pixel recording mode is set.
≥When the picture size setting is other than [640],
the scene around the subject can be recorded
wider than that in [640].
ª
On-screen display in the card
recording mode
100 100 100
1) Still picture size
2) Number of recordable still pictures
(When no pictures can be recorded, the red
light will flash.)
3) Quality of still pictures
ª
Progressive Photoshot
You can record still pictures with higher picture
quality and frames. (You cannot switch the
progressive function off/on.)
≥In the tape recording mode, the progressive
function may be disabled depending on the
other functions used. (
.
], mosaic-pattern
1)
2)
3)
)
-64-
LSQT0973
29