Attaching The Lens Cap; The Grip Belt - Panasonic Palmcorder PV-GS180 Operating Instructions Manual

(37) Shoulder strap fixture
1
2
≥Put the strap through the fixture 1 and through
the stopper 2 so it will not come off. Extend
part 3 by at least 2 cm (1 inch).
≥Fit the other end of the belt similarly.
1
(38)
(38) Lens hood
In order to remove the lens hood, rotate it
counter-clockwise 1. In order to fit it, put into slot
2, and then rotate it clockwise.
14
LSQT0973
Before using
(37)
3
2

Attaching the lens cap

Attach the lens cap to protect the surface of the
lens.
1
Run the end of the lens cap cord through
the hole in the grip belt attachment part and
run the lens cap through the lens cap cord.
≥When removed, the lens cap can be attached to
the lens cap fixture.
≥To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your first
2 fingers.

The grip belt

Adjust the belt length so it fits your hand.
1
Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
2
1 3