Functions Cannot Be Used; Simultaneously - Panasonic Palmcorder PV-GS180 Operating Instructions Manual

CHANGE MODE TO USE USB:
The USB cable is connected to the
Camcorder in Card Recording Mode.
DISCONNECT USB CABLE:
You are attempting to turn the mode dial in
PC mode with the USB cable connected to
the Camcorder. You are attempting to
record pictures on a tape/card with the USB
cable connected to the Camcorder.
NO INK IN PRINTER:
There is no ink. Check the connected
printer.
NO PAPER IN PRINTER:
There is no paper. Check the connected
printer.
PRINTER ERROR:
Check the connected printer.
PC DOES NOT SUPPORT USB2.0:
The Camcorder is connected to a personal
computer that does not support USB 2.0.
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (DV DATA MODE):
You are attempting to change [D.ZOOM]
setting during DV DATA Mode.
REVERSE THE LCD MONITOR:
At the time of 0 Lux MagicPix mode, when
LCD monitor is not reversed, it displays.
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
64
LSQT0973
Others

Functions cannot be used

simultaneously

Some functions in the Camcorder are disabled or
cannot be selected due to its specifications. The
table below shows examples of functions
restricted by conditions.
Functions
≥Progressive
≥Digital zoom
≥Wide mode
≥Fade
≥Image stabilizer ≥When the Card Recording
≥Backlight
compensation
≥Soft skin
≥Tele-macro
≥Recording
check
≥MagicPix
≥RapidFire
Consecutive
Photoshot
≥Zoom
microphone
≥Wind noise
reduction
Conditions which disable
the functions
≥When recording onto a
tape and a card
simultaneously
≥When digital zoom
(10k or higher) is used
≥When the shutter speed is
1/750 or faster in Tape
Recording Mode
≥When the gain value is
increased in Tape
Recording Mode
≥When the MagicPix
function is used
≥When the portrait mode of
the scene mode is used in
Tape Recording Mode
≥When the wide mode is
used
≥When the Card Recording
mode is used
mode is used
≥When the MagicPix
function is used
≥When the iris/gain is set
≥When the MagicPix
function is used
≥While recording to a tape
≥While recording to a tape
≥When the Card Recording
mode is used
≥When [PICTURE SIZE] is
set to other than [640]
≥An external microphone is
used