Recording On A Tape; Recording Check; Lsqt1174 - Panasonic NV-GS60GN Operating Instructions Manual

LSQT1174ENG.book 19 ページ ２００７年１月２９日 月曜日 午後１時２８分

Recording on a tape

Remove the lens cap. (
-7-
(When the camera is turned on with the lens cap
fitted, the automatic white balance adjustment
may not function properly. Please turn the camera
on after removing the lens cap.)
≥Set to Tape Recording Mode.
1
Press the recording start/stop button to
start recording.
2
Press the recording start/stop button again
to pause recording.
;
≥For the recording time on a tape, refer to
≥Carry out a recording check (
the image is recorded properly.
≥In order to find the unrecorded section, carry out
the blank search ( ).
-20-
ª
On-screen display in the tape
recording mode
0h00m10s00f 0h00m10s00f 0h00m10s00f
1) Recording time elapse
2) Remaining tape indication
Record mode
)
.
-9-
) to verify that
-19-
1)
R 0:30 R 0:30 R 0:30
2)
ª Concerning the remaining tape time
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥During a 15 seconds or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.

Recording check

The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon 1 appears.
2
Move the joystick left to select the
recording check icon [
1
≥The [RECORDING CHECK STARTED]
indication appears on the screen of the movie
camera.
].
19

LSQT1174