Setting Lan Interface Parameters - HP MSR SERIES Configuration Manual

Item
Idle Timeout

Setting LAN interface parameters

After finishing the previous configuration, click Next.
Figure 25 Setting LAN parameters
Table 22 Configuration items
Item
VLAN Interface
IP Address
Subnet Mask
DHCP Server
Start IP Address
Description
server if no data exchange occurs between it and the server within the specified
time. After that, it automatically establishes the connection upon receiving a
request for accessing the Internet from the LAN.
When Online according to the Idle Timeout value is enabled, specify an idle
timeout value.
Description
Display the ID of the VLAN interface to be configured.
IMPORTANT:
By default, the VLAN interface on the device that has the smallest number is displayed. If no
VLAN interface is available on the device, the system automatically creates an interface
numbered 1 and displays it.
Specify the IP address and a subnet mask for the VLAN interface.
Select whether to enable DHCP server.
If you enable DHCP server, the configuration items of the DHCP server will be displayed.
Specify the IP address range for dynamic allocation in an extended address pool.
39