Ethernet Interface - HP MSR SERIES Configuration Manual

Ethernet interface

Figure 18 Setting Ethernet interface parameters
Table 10 Configuration items (in auto mode)
Item
WAN Interface
Connect Mode: Auto
MAC Address
Table 11 Configuration items (in manual mode)
Item
WAN Interface
Connect Mode: Manual
TCP-MSS
MTU
IP Address
Subnet Mask
Gateway Address
DNS1
Description
Select the Ethernet interface to be configured.
Select the Auto connect mode to automatically obtain an IP address.
Specify the MAC address of the Ethernet interface in either of the two ways:
•
Use the MAC address of the device—Use the default MAC address of the
Ethernet interface, which is displayed in the brackets.
•
Use the customized MAC address—Assign a MAC address in the field to the
Ethernet interface.
Description
Select the Ethernet interface to be configured.
Select the Manual connect mode to configure an IP address.
Set the maximum TCP segment length of an interface.
Set the MTU of an interface.
Specify the IP address of the Ethernet interface.
Select a subnet mask for the Ethernet interface.
Configure the next hop of a static route.
Specify a DNS server IP address for the interface. Note that DNS server 1 is used
before DNS server 2.
31