HP MSR SERIES Configuration Manual page 656

Hide thumbs Also See for MSR SERIES:
Table of Contents

Advertisement

source of SIP signaling and media streams to avoid manual IP address configuration, and therefore
help network management.
Source IP address binding is supported on the Layer 3 Ethernet interface, GigabitEthernet interface, or
dialer interface.
For information about DHCP, see Layer 3—IP Services Configuration Guide in HP MSR Router Series
Configuration Guides (V5).
Configuring source address binding
Select Voice Management > Call Connection > SIP Connection from the navigation tree, and click the
Session Properties tab to access the session properties configuration page, as shown in
Figure 661 Source address binding configuration page
Table 242 Configuration items
Item
Media Stream Binding
Mode
IPv4 Address Bound with
the Media Stream
Interface Bound with the
Media Stream
Signaling Stream Binding
Mode
IPv4 Address Bound with
the Signaling Stream
Interface Bound with the
Signaling Stream
Description
Configure media stream binding mode or disable media stream binding.
None—Disable media stream binding.
IPv4 Address Binding—Bind the media stream to a static IPv4 address.
Interface Binding—Bind the media stream to an interface.
If you select IPv4 Address Binding as the media stream binding mode, you must
enter the IPv4 address to be bound in this field.
If you select Interface Binding as the media stream binding mode, you must specify
the interface to be bound from the list. Only the Layer 3 Ethernet interface, GE
interface, and dialer interface are supported.
Configure the signaling stream binding mode or disable signaling stream binding.
None—Disable signaling stream binding.
IPv4 Address Binding—Bind the signaling stream to an IPv4 address.
Interface Binding—Bind the signaling stream to an interface.
If you select IPv4 Address Binding as the signaling stream binding mode, you must
enter the IPv4 address to be bound in this field.
If you select Interface Binding as the signaling stream binding mode, you must
specify the interface to be bound from the list. Only Layer 3 Ethernet interfaces, GE
interfaces, and dialer interfaces are supported.
639
Figure
661.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents