Operating The Base Station On The Pabx; Setting Recall; Setting Access Codes (External Line Prefixes) - Gigaset A580 IP User Manual

Operating the base station on the PABX

The following settings are only necessary when your PABX requires them; see
the PABX user guide. The settings only affect fixed line network connections.

Setting recall

Your phone is preset at the factory for operation on the main connection (recall
250 ms). For operation on a PABX, you may have to change this value. Please
refer to the user guide for your PABX.
¢
§Menu§
q
The current setting is indicated by ‰.
a

Setting access codes (external line prefixes)

Depending on your PABX, you must dial an access code before making external
calls in order to obtain an external line. You can store this access code in your
phone. It is then added automatically to the numbers, e.g. when dialling using
the calls list.
¢
§Menu§
Access Code
~
a
If an access code is set, the following applies:
u
The access code is added automatically when dialling from the calls list and
when dialling emergency numbers.
u
When dialling numbers manually and dialling numbers from the directory
you must add the access code yourself.
¢ ¢
Settings Base
Select recall and press
Press and hold (idle status).
¢ ¢
Settings Base
Select and press
§OK§
Enter or edit the access code (maximum three digits) and press
Press and hold (idle status).
Operating the base station on the PABX
¢
Telephony Fixed line
.
§OK§
Additional Features
.
¢
Recall
.
§OK§
97