Restoring The Base Station To The Factory Settings - Gigaset A580 IP User Manual

Restoring the base station to the factory settings

Resetting the base station via the menu
Each individual setting is reset, in particular:
u
VoIP settings such as VoIP provider and account data and DTMF settings
£
( Page
u
Settings for the local network (
u
Default line (
u
The names of the handsets (
u
Eco mode
u
PABX connection settings (
calls list are deleted.
The following are not reset:
u
Date and time
u
System PIN
The handsets are still registered.
¢
§Menu§
~
§OK§
Resetting the base station using a key on the base station
As with resetting the base station via the menu, all individual settings are reset.
The system PIN will also be reset to "0000" and all handsets registered
above and beyond the scope of delivery will be de-registered.
Please note
For how to reregister the handsets after resetting, where applicable,
£
Page
¤
Remove the cable connections from the base station to the router
£
( Page
¤
Remove the base station mains adapter from the socket (
¤
Press and hold the registration/paging key (
¤
Plug the mains adapter back into the power socket.
¤
Press and hold the registration/paging key (at least 10 sec.).
¤
Release the registration/paging key. The base station has now been reset.
You will then need to "prepare to use" the base station again, i.e. re-establish
the cable connections to the fixed line network and the router and make the
settings for VoIP telephony (
92, Page 110, Page
£
Page 90)
/ is deactivated (
Eco mode+
¢ ¢
Settings Base
Enter the system PIN and press
Press the display key to confirm.
75.
20) and fixed line network (
£
Setting the base station via the handset
132)
£
Page 94, Page
£
Page 78)
£
Page
£
Page 97)
Base Reset
.
§OK§
£
Page
£
Page 21).
107)
72)
19).
£
Page
Page 2).
19).
89