Protecting Scenes - Panasonic HDC-SX5P Operating Instructions Manual

Editing
≥ Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point
where you want to divide the scene. (l 82)
4
When the confirmation message
appears, select [YES], then press
the cursor button.
5
Delete the unnecessary scenes.
≥ Refer to P86 for deleting scenes.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
(HD mode only)
To delete all the divided points
Press the MENU button, then select
[EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
and press the cursor button.
≥ When the confirmation message appears,
select [YES], then press the cursor button.
≥ All divided points set on this unit will be
canceled.
≥ The scenes that were deleted after division
cannot be recovered.
≥ Scenes cannot be divided if the number of
scenes has reached 999.
≥ When the amount of time recorded on the
scene is too short, dividing may not be
possible.
≥ If images that have been divided are played
back on another device, the points where the
scenes join may not be clear.
≥ Data that has been recorded on another device
cannot be divided.
≥ When [CANCEL ALL] is selected, the divided
points of all scenes are deleted and the unit
turns back to the setting that plays back all
scenes even if you selected to play back the
scenes by date.
≥ Data that has been recorded or edited on
another device cannot be divided and the
divided points cannot be deleted.
≥ Discs other than DVD-RAM cannot be divided
or deleted and the divided points cannot be
deleted when the remaining space on the disc
becomes small.
88
VQT1J42

Protecting scenes

This is for preventing scenes from
being deleted by mistake.
ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ
ＲＡＭ -ＲＷ
Recorded scenes can be protected so that they
are not deleted by mistake.
(Even if you protect some scenes, formatting
the disc or SD card will delete them.)
¬ Rotate the mode dial to select
and then select the [
1
Press the MENU button, then
select [PLAY SETUP]
[SCENE PROTECT]
press the cursor button.
2
Select the scene to be protected
and then press the cursor button.
The [ ] indication appears and the scene is
protected.
≥ Press the cursor button again to cancel the
setting.
≥ 2 or more scenes can be set in succession.
To complete the settings
Press the MENU button.
ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ ＨＤ
VIDEO
-Ｒ -Ｒ Ｄ Ｌ
] or [ ] tab.
#
#
[YES] and