Page 1 Operating Instructions High Definition Video Camera HDC-SDT750 Model No. HDC-TMT750 Before use, please read these instructions completely. VQT3B52...
Page 2: Information For Your Safety
Information for Your Safety WARNING: The socket outlet shall be installed near the equipment and easily accessible. TO REDUCE THE RISK OF FIRE, The mains plug of the power supply cord ELECTRIC SHOCK OR PRODUCT shall remain readily operable. DAMAGE, To completely disconnect this apparatus ≥...
Page 3 -If you see this symbol- How to replace the fuse Information on Disposal in other The location of the fuse differ according Countries outside the European to the type of AC mains plug (figures A Union and B). Confirm the AC mains plug fitted and This symbol is only valid follow the instructions below.
Page 4 ∫ Indemnity about recorded ∫ Cards that you can use with content this unit Panasonic does not accept any SD Memory Card, SDHC Memory Card responsibility for damages directly or and SDXC Memory Card indirectly due to any type of problems that ≥...
Page 5: Table Of Contents
Contents Setup Information for Your Safety.....2 Accessories..........7 [1] Using the menu screen ..... 35 Using the quick menu ....36 Preparation [2] Using the Setup Menu ....37 [3] Using with the remote Before using control......... 45 [1] Parts identification Operation of direction buttons/ and handling.........
Page 6 [3] Dubbing with a Blu-ray disc Playing back motion pictures/ still pictures by date ..... 91 recorder, video, etc....121 Face highlight playback/ Dubbing in high-definition picture Highlight playback/ quality ........121 Intelligent scene selection .... 92 Dubbing in standard picture Changing the playback settings quality ........
Page 7: Accessories
Accessories Check the accessories before using this unit. Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Aug. 2010. These may be subject to change. Lens hood Battery pack VDW2053 VW-VBG130 AC adaptor Shoe adaptor VSK0698 VYC0996...
Page 8: Preparation
Battery release lever [BATT] (l 13) Battery holder (l 13) 10 DC input terminal [DC IN] (l 16) ≥ Always use the supplied AC adaptor or a genuine Panasonic AC adaptor (VW-AD21E/EB-K; optional). 11 HDMI mini connector [HDMI] (l 104, 110)
Page 9 25 LCD monitor (Touch screen) (l 21) ≥ It can open up to 90o. 29 30 31 ≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen.
Page 10 33 Shoe adaptor mounting part (l 162) 34 Shoe adaptor cover (l 162) 35 Shoe adaptor release lever [SHOE ADAPTOR RELEASE] (l 162) 36 Photoshot button [ ] (l 28) 37 Zoom lever [W/T] (In motion picture recording mode or still picture recording mode) (l 47) Thumbnail display switch [ Volume lever [sVOLr] (In playback...
Page 11 ∫ About the 3D Conversion Lens (l 52) Attachment screw Protective glass (front) Lens Adjustment dial cover Vertical position adjustment dial Vertical alignment adjustment dial Horizontal image position adjustment dial Protective glass (rear) Camera body attachment part (convex) Lens front cap 10 Horizontal line for adjustment ≥...
Page 12: Setup
Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do not support this function cannot be used). Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products.
Page 13: Inserting/Removing The Battery
≥ We recommend using Panasonic batteries (l 7, 14, 15, 161). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.
Page 14: Charging And Recording Time
Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC/humidity: 60%RH HDC-SDT750 Battery model number Maximum Actual Charging Recording [Voltage/Capacity continuously recordable time mode (minimum)] recordable time time 1080/50p, Supplied battery/ HA, HG, VW-VBG130 (optional) 2 h 35 min 1 h 40 min [7.2 V/1250 mAh]...
Page 15 ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. The actual time can vary depending on your actual use. ≥ If the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green and will not change until the remaining time falls below 9 hours 59 minutes.
Page 16: Connecting To The Ac Outlet
Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥...
Page 17: Recording To A Card
≥ Keep the Memory Card e_cam out of reach of children to prevent (This website is in English only.) swallowing.
Page 18: Inserting/Removing An Sd Card
Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 42) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Page 19: Turning The Unit On/Off
Preparation Turning the unit on/off Setup You can turn the unit on and off using the power button, the LCD monitor or the viewfinder. Turning the unit on and off with the power button Press the power button to turn on the unit To turn off the unit Hold down the power button until the status indicator...
Page 20: Selecting A Mode
Preparation Selecting a mode Setup Change the mode to recording or playback. Operate the mode dial to change the mode to ≥ Align with the status indicator A. Motion picture recording mode (l 26) Still picture recording mode (l 28) Playback mode (l 32, 87) VQT3B52...
Page 21: Adjusting Lcd Monitor/ Viewfinder
Preparation Adjusting LCD monitor/ Setup viewfinder ∫ About the operation icons How to use the touch screen These icons are used to switch the menu and thumbnail display page, for item You can operate by directly touching the selection and setting etc. LCD monitor (touch screen) with your finger.
Page 22: Viewfinder Adjustment
Viewfinder adjustment Recording showing the contents to a partner ∫ Adjusting the field of view It adjusts the field of view to show the ¬ Change the mode to images on the viewfinder clearly. Extend the viewfinder and rotate Adjust the focus by rotating the the LCD monitor towards the lens eyepiece corrector dial.
Page 23: Setting Date And Time
MUST ONLY BE REPLACED BY (l 37): QUALIFIED PERSONNEL. IF THIS IS [HOME]/ [DESTINATION] NECESSARY, CONTACT THE PANASONIC ≥ The year can be set between 2000 and CUSTOMER CARE CENTRE ON 132600 2039. FOR YOUR NEAREST AUTHORIZED ≥ The 24-hour system is used to display the SERVICE CENTRE.
Page 24: Basic
Basic Before recording Recording/ Playback ∫ Basic camera positioning 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use sub recording start/stop button A when holding the unit around your waist.
Page 25: [Hdc-Tmt750]
Basic Selecting a media to Recording/ Playback record [HDC-TMT750] The card and built-in memory can be selected separately to record motion pictures or still pictures. Change the mode to Select the menu. : [MEDIA SELECT] Touch the media to record motion pictures or still pictures. A [VIDEO/SD CARD] B [VIDEO/Built-inMemory] ...
Page 26: Recording Motion Pictures
Basic Recording motion Recording/ Playback pictures Change the mode to Open the LCD monitor or extend the viewfinder. Press the recording start/stop button to start recording. B When you begin recording, ; changes to ¥. Press the recording start/stop button again to pause ≥...
Page 27: Motion Pictures
∫ Screen indications in the motion picture recording mode 0h00m00s 0h00m00s 0h00m00s A Recording mode R 1h20m R 1h20m R 1h20m B Approximate remaining recordable time (When the remaining time is less than 1 minute, [R 0h00m] flashes red.) C Recording time elapsed Each time the unit is put into recording pause, the counter display will be reset to “0h00m00s”.
Page 28: Recording Still Pictures
Basic Recording still pictures Recording/ Playback Change the mode to Open the LCD monitor or extend the viewfinder. Press the button halfway. (For auto focus only) Press the button fully. ≥ Align with the status indicator A. Focus indication: A Focus indication ±...
Page 29: Recording Still Pictures In Motion Picture Recording Mode
∫ About the screen indications in ∫ About the focusing area still picture recording When there is a contrasting object ahead or behind the subject in the focus area, the subject may not be focused. If so, move the MEGA R3000 R3000 R3000...
Page 30: Intelligent Auto Mode
Basic Intelligent auto mode Recording/ Playback The following modes appropriate for the condition are set just by pointing the unit to what you want to record. /MANUAL Intelligent auto/Manual button Press this button to switch intelligent auto mode/manual mode. ≥ Please refer to page 83 about manual mode.
Page 31: Auto Focus
≥ Faces cannot be detected depending on the recording conditions, such as when faces are of certain sizes or at certain tilts or when digital zoom is used. ≥ The microphone setup is set to surround in the intelligent auto mode. (l 74) ∫...
Page 32: Motion Picture/Still Picture Playback
Basic Motion picture/Still Recording/ Playback picture playback ≥ Align with the status indicator A. Change the mode to Touch the play mode select icon B.  Select the [VIDEO/PICTURE] you wish to play back. ≥ Touch [ENTER]. Select the [MEDIA] and [VIDEO/ PICTURE] you wish to play back.
Page 33 Select the playback operation by touching the operation icon. A Operation icon 0h00m00s 0h00m00s 0h00m00s ≥ Touch to display/not-display the operation icon.  Motion picture playback Still picture playback Playback/Pause Slide show (playback of the still 1/;: 1/;: Rewind playback pictures in numerical order) Fast forward playback start/pause.
Page 34: Motion Picture Compatibility
∫ Change the thumbnail display ∫ Speaker/Headphone volume adjustment While the thumbnail is displayed, the thumbnail display changes in the following Operate the volume lever or the adjust zoom order if the zoom lever or adjust zoom buttons to adjust the speaker/headphone buttons are operated to side or volume during motion picture playback.
Page 35: Setup
Basic Using the menu screen Setup Press the MENU button. Touch the desired item to enter the setting. Touch the top menu A. Touch [EXIT] or press the MENU button to exit the menu setting. Touch the submenu B. ∫ About guide display After touching , touching the submenus...
Page 36: Using The Quick Menu
Using the quick menu This allows quick setting of some of the menus. Press the Q.MENU button. The following menus can be set. Touch the desired menu. ≥ The items displayed differ depending on the position of the mode dial or settings. Icon Function Page...
Page 37: Using The Setup Menu
Basic Using the Setup Menu Setup ≥ The items displayed differ depending on the position and settings of the mode dial. Select the menu. : [SETUP] # desired setting [DISPLAY] [OFF]/[ON] The screen display can be changed to [OFF] (a portion of information displayed) or [ON] (all information displayed).
Page 38: Date Format
(Only when setting the region of your travel destination)  Touch to select your travel destination and touch [ENTER]. ≥ Touch [SUMMER TIME SET] to set  daylight saving time. appears and the summer time setting is turned on. The travel destination time and time C The local time at the selected difference from the home region time are travel destination...
Page 39 [QUICK POWER ON] [OFF]/[ON] The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set to ≥ Depending on the recording conditions, start time may be longer than 1 second. ≥ In the quick power on mode, the zoom magnification becomes 1k. [QUICK START] [OFF]/[ON] This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is...
Page 40 [REMOTE CONTROL] [OFF]/[ON] Please refer to page 45. [REC LAMP] [OFF]/[ON] The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording.
Page 41: Hdmi Resolution
[EVF SET] It adjusts the brightness of the viewfinder. ≥ These settings will not affect the images actually recorded. Extend the viewfinder and open the LCD monitor. Touch [EVF SET]. ≥ The viewfinder turns on. Touch to adjust the setting. ≥...
Page 42: Format Card
[INITIAL SET] Set to [YES] for changing the menu settings back to the default condition. ≥ Settings for [CLOCK SET], [MEDIA SELECT] and [LANGUAGE] will not be changed. * For users who have , this menu is not displayed. [FORMAT CARD] Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored.
Page 43 [CARD STATUS] The amount of space left on the SD card can be checked. (Only when the mode is at the position) ≥ Touch [EXIT] or press the MENU button to close the indication. ≥ The SD card requires some space to store information and manage system files, so the actual usable space is slightly less than the indicated value.
Page 44: Demo Mode
[DEMO MODE] [OFF]/[ON] This item is used to start the unit demonstration. (Only when the mode is at the position) If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted, the demonstration automatically starts. If any operation takes place, the demonstration is cancelled.
Page 45: Using With The Remote Control
Basic Using with the remote Setup control Select the menu. 10 Menu button [MENU] 11 OK button [OK] : [SETUP] # * means that these buttons function in the [REMOTE CONTROL] # [ON] same manner as the corresponding buttons on the unit. Remove the insulation sheet A before START/ using.
Page 46: Operation Of Direction Buttons/Ok Button
Operation of direction CAUTION buttons/OK button Danger of explosion if battery is incorrectly replaced. Replace only with Press a direction button. the same or equivalent type recommended by the manufacturer. STILL ADV PAUSE STILL ADV Dispose of used batteries according to SKIP STOP SKIP...
Page 47: Advanced
Advanced Zoom in/out function Recording (Advanced) The maximum optical zoom ratio is 12k. The default setting of the [ZOOM MODE] is [i.Zoom 18k]. It can be extended to a maximum of 18k during motion picture recording mode. (l 65) ¬ Change the mode to Zoom lever/Adjust zoom buttons T side: Close-up recording (zoom in)
Page 48: Image Stabilizer Function
Advanced Image stabilizer function Recording (Advanced) Use the image stabilizer to reduce the effects of shake during recording. This unit is equipped with HYBRID O.I.S. HYBRID O.I.S. is a hybrid of optical and electrical image stabilizer. ¬ Change the mode to Optical image stabilizer button O.I.S.
Page 49: Optical Image Stabilizer Lock
Optical image stabilizer lock In motion picture recording mode, you can further improve optical image stabilization by touching and holding O.I.S. LOCK icon. With this function, you can further reduce the effects of the shake that tends to occur when using zoom. A O.I.S.
Page 50: Af/Ae Tracking
Advanced AF/AE tracking Recording (Advanced) It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) ¬ Change the mode to Touch ∫...
Page 51: 1080/50P Recording
* This means the highest quality for this unit. Latest information, such as which Panasonic TVs can play back the scenes recorded in 1080/50p recorded with this unit, can be found on the following support site. (As of Aug. 2010) http://panasonic.jp/support/global/cs/e_cam/index.html...
Page 52: Recording 3D Video
Advanced Recording 3D video Recording (Advanced) With the supplied 3D Conversion Lens attached, you can record life-like and powerful 3D video. To view 3D video, a television that supports 3D is required. 3D video The image is an illustration. ≥ In the unit, the recordable 3D videos are side-by-side format (2-screen structure). ≥...
Page 53: Conversion Lens
Tighten the attachment screw of the 3D Conversion Lens by rotating to LOCK. LOCK LOCK ≥ Be careful not to overtighten. If the 3D Conversion Lens is overtightened, it may not be possible to remove it from the unit. ≥ Attach the 3D Conversion Lens securely so it will not tilt or move.
Page 54 Open the adjustment dial cover. ≥ When turning the adjustment dials, hold the 3D Conversion Lens in the palm of your hand from the bottom and operate with the fingers of your other hand without applying too much force from above. When checking the adjustment, check with your fingers off the adjustment dials.
Page 55: To Start Recording
Removing the lens front cap. ≥ Touch [NEXT]. (After checking the operation description, touch [NEXT].) Adjust the vertical alignment adjustment dial to align the vertical position of the subject shown duplicated.  ≥ Aim the unit at a subject from a distance of approximately 1.2 m to 2 m, and keep the image shown level by using the guidelines A.
Page 56 ≥ Use of a tripod is recommended for recording with a stable picture. ≥ The reception range for the remote control might become narrow at the upper side of the unit, so operate from the lower side. (l 46) ≥ You will hear a sound when the unit is moved rapidly with the 3D Conversion Lens attached, but this is not a malfunction.
Page 57: Functions Not Available During 3D Recording
∫ Functions that cannot be used during 3D recording When recording with the 3D Conversion Lens, you cannot use certain functions. Functions not available during 3D recording (Button/lever operations) (Recording functions) j Zoom in/out function j Intelligent contrast control j HYBRID O.I.S. j Smile shot j Intelligent auto mode j Soft skin mode...
Page 58: Recording Functions Of Operation Icons
Advanced Recording functions of Recording (Advanced) operation icons Select the operation icons to add different effects to the images to be recorded. ¬ Change the mode to Touch to display the (e.g. Backlight compensation) operation icons on the screen. Select an operation icon. ≥...
Page 59: Intelligent Contrast Control
Fade When you start recording, the image/audio gradually (Fade in) appears. (Fade in) When you pause recording, the image/audio gradually disappears. (Fade out) ≥ The fade setting is cancelled when the recording stops. ∫ To select the colour for fade in/out (Fade out) : [RECORD SETUP] # [FADE COLOUR] # [WHITE] or [BLACK]...
Page 60: Smile Shot
Smile shot When a smiling face is detected during motion picture recording, the unit automatically records a still picture. The icon changes each time it is touched. (ON) # (Face recognition) # OFF The unit records a still picture on detecting a smiling face. Still pictures are only recorded when the face of a person registered using face recognition (l 68) is detected.
Page 61 Built-in flash When the button is pressed, the flash is activated and the picture will be recorded. Use the built-in flash in order to record still pictures in dark places. Each time the ß icon is selected, the indication changes by one setting in the following order: ß...
Page 62 Self-timer This is for recording still pictures using the timer. Each time the icon is selected, the indication changes by one setting in the following order: Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting cancelled ≥...
Page 63 Guideline You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. It will switch every time the icon is touched. # Setting cancelled ≥...
Page 64: Recording Functions Of Menus
Advanced Recording functions of Recording (Advanced) menus [SCENE MODE] When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ≥ Change the mode to : [RECORD SETUP] # [SCENE MODE] # desired setting [OFF]: Cancel the setting To make fast moving scenes less shaky with slow playback 5Sports:...
Page 65: Zoom Mode
≥ (Night scenery/Night portrait) ≥ (Fireworks) j The shutter speed is 1/2 or more in still j The shutter speed is 1/25. picture recording mode. j Image may get washed out when j It is recommended using a tripod. recorded in bright surrounding. ≥...
Page 66: Time Lapse Rec
[TIME LAPSE REC] A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is recorded as a short time motion picture. A frame is recorded with a set recording interval. 25 frames will make up motion picture of 1 second. ≥...
Page 67: Relay Rec
[DIGITAL CINEMA] Use this function to record an image with vivid colour, like an image on a movie film. ≥ Change the mode to ≥ Switch to manual mode. (l 83) ≥ Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 65) ≥...
Page 68: Face Recog
[FACE RECOG.] Face recognition is a function for finding faces that resemble faces which have already been registered and automatically prioritising focus and exposure for those faces. This function makes it possible to keep the face of your loved ones in focus even when they are at the back or on the end of a line in a group picture.
Page 69 Entering text Icon Description of operation [A] etc. Enters a character. Moves cursor left. Moves cursor right. [A/a] Switches between [A]/[a] (alphabet) and [&/1] (symbols/numbers). Deletes a character. [Delete] Deletes the previous character if the cursor is in an empty space. [Enter] Ends text entry.
Page 70 ∫ Canceling a registered person Select the menu. [RECORD SETUP] # [FACE RECOG.] # [SET] # [DELETE] or [DELETE ALL] ≥ Touching [DELETE ALL] cancels all the registered people. (when [DELETE] is selected) Touch the person to cancel. ≥ When touched, the person is selected and is displayed.
Page 71: Face Framing
[NAME DISPLAY] When a registered person is detected by face recognition during recording, the name registered for that person is displayed. ≥ Change the mode to : [RECORD SETUP] # [NAME DISPLAY] # desired number [OFF]/[1]/[2]/[3] ≥ Displayed name will disappear after a while. ≥...
Page 72 [AUTO SLOW SHTR (2D)] You can record bright pictures even in dark places by slowing the shutter speed. ≥ Change the mode to ≥ Switch to manual mode. (l 83) : [RECORD SETUP] # [AUTO SLOW SHTR (2D)] # [ON] ≥...
Page 73: Shooting Guide
[Digital Cinema Colour] ™ Recording motion pictures with more vivid colours, using x.v.Colour technology. ≥ Change the mode to ≥ Switch to manual mode. (l 83) : [RECORD SETUP] # [Digital Cinema Colour] # [ON] ≥ For more realistic colours, use an HDMI mini cable with a TV that supports the ™...
Page 74 [WIND NOISE CANCELLER] This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Change the mode to ≥ Switch to manual mode. (l 83) : [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON] ≥ This function’s default setting is [ON]. ≥...
Page 75: Mic Level
[MIC LEVEL] When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. ≥ Change the mode to ≥ Switch to manual mode. (l 83) Select the menu. : [RECORD SETUP] # [MIC LEVEL] # desired setting [AUTO]: AGC is activated, and the recording level is adjusted automatically.
Page 76 [BASS SETTING] Change the lower setting of the built-in microphone according to your choice. ≥ Change the mode to ≥ Switch to manual mode. (l 83) : [RECORD SETUP] # [BASS SETTING] # desired setting [0dB]/[+3dB]/[+6dB]/[LOWCUT] ≥ Normally set to [0dB]. ≥...
Page 77 [ZEBRA] Parts where white saturation (colour saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). ≥ Change the mode to ≥ Switch to manual mode. (l 83) : [RECORD SETUP] # [ZEBRA] # [ON] ≥...
Page 78 [HISTOGRAM] A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is displayed. It is possible to determine the exposure of the whole image by looking at the distribution in the graph. Adjust the brightness using [IRIS]. (l 85) ≥...
Page 79: Picture Size
[PICTURE SIZE] The higher the number of pixels, the higher the clarity of the picture when printing. ≥ Change the mode to : [PICTURE] # [PICTURE SIZE] # desired setting ≥ It is possible to set from the quick menu. (l 36) ≥...
Page 80: Aspect Ratio
[QUALITY] Selecting the picture quality. ≥ Change the mode to : [PICTURE] # [QUALITY] # desired setting Still pictures with a high picture quality are recorded. Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality.
Page 81 [HI-SPEED BURST] Recording is done continuously at the rate of 50 still pictures per second. Use this function to record an object with fast movement. ≥ Change the mode to Select the menu. (When [Record] is selected in step 3) Touch [REC ALL] or [SELECT].
Page 82: Af Assist Lamp
[AF ASSIST LAMP] Illuminating the subject makes it easier for the camera to focus when recording in low light conditions that make focusing difficult. ≥ Change the mode to ≥ Switch to manual mode. (l 83) : [PICTURE] # [AF ASSIST LAMP] # [AUTO] ≥...
Page 83: Manual Recording
Advanced Manual recording Recording (Advanced) The operation sequence differs for the LCD monitor and viewfinder. ¬ Change the mode to (The manual focus, white balance, shutter speed, brightness (Iris and Gain) settings are retained when you change between motion picture recording mode and still picture recording mode) Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual mode.
Page 84: White Balance
White balance The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual mode.
Page 85: Manual Shutter Speed/Iris Adjustment
Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual mode. (l 83) ≥...
Page 86: Recording With Manual Focus
Recording with manual focus Perform focus adjustments using the multi manual ring. If auto focusing is difficult due to the conditions, then use manual focus. ¬ Change the mode to ≥ Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual mode.
Page 87: Playback (Advanced)
Advanced Playback Operations Playback (Advanced) Motion picture playback using operation icon For details on the basic playback operations, refer to page 32. Playback operation Playback display Operating steps Touch 5 during playback to fast forward. (Touch 6 to rewind.) ≥ The fast forward/rewind speed Fast forward/ increases if you touch 5/6 again.
Page 88: Creating Still Picture From Motion Picture
Playback Playback display Operating steps operation 1) Touch 1 to display the direct playback bar A. 2) Touch or drag the direct playback bar. During Playback (l 21) ≥ The playback pauses temporarily and skips to the touched or dragged Direct playback position.
Page 89: Highlight&Time Frame Index
Highlight&Time frame index An image of one scene is displayed as a thumbnail at set search condition. Scene can be played back from any midway point of the scene you wish to see. ≥ Operate the zoom lever or the adjust zoom buttons to side and change over the thumbnail display to Highlight&Time frame index.
Page 90: Resuming The Previous Playback
Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. : [VIDEO SETUP] # [RESUME PLAY] # [ON] If playback of a motion picture is stopped, appears on the thumbnail view of the stopped scene.
Page 91: Various Playback Functions
Advanced Various playback Playback (Advanced) functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. Touch the date select icon.  A Date select icon Touch the playback date.
Page 92: Face Highlight Playback/Highlight Playback/Intelligent Scene Selection
Face highlight playback/Highlight playback/Intelligent scene selection A part can be extracted and played back even when not set to normal playback. Touch Touch the desired playback mode. [FACE HIGHLIGHT]: Giving priority to the parts with detected faces, the part that was recognised as clearly recorded is extracted from a long recording, and it can be played back in a short time with music added.
Page 93 ≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed. (Highlight playback) ≥ Highlight playback cannot be performed with interval-recorded motion pictures. (l 66) (Intelligent scene selection) ≥ Up to 9 sections can be skipped for a single scene. ≥...
Page 94 ∫ Playback time setting Touch the playback time. ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even play back if the part recognised as clearly recorded is short.
Page 95: Changing The Playback Settings And Playing Back The Slide Show
Changing the playback settings and playing back the slide show Touch Touch the desired item. [DATE SETUP]: Select the date to be played back. [SLIDES INTERVAL]: Selects the interval between still pictures at playback. [MUSIC SELECT]: Select the music to be played on playback. (When [DATE SETUP] is selected) Touch the playback date.
Page 96: Editing
Advanced Deleting scenes/still Editing pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to To delete by confirming images being played back 0h00m00s 0h00m00s 0h00m00s Press the button while scenes or still pictures to be deleted are being played back.
Page 97 ≥ You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ You can also delete still pictures by pressing the MENU button, selecting [PHOTO SETUP] # [DELETE] # [ALL SCENES] or [SELECT]. ≥...
Page 98: Dividing A Scene To Partially Delete
Dividing a scene to partially delete To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ≥ Change the mode to and touch the play mode select icon to select [SD CARD]/ [1080/50p] or [SD CARD]/[AVCHD].
Page 99: Deleting Personal Information
Deleting personal information Deletes face recognition information from scenes in which faces were recognised. ≥ Change the mode to and touch the play mode select icon to select [SD CARD]/ [1080/50p] or [SD CARD]/[AVCHD]. (l 32) ≥ Change the mode to and touch the play mode select icon to select [SD CARD]/ [1080/50p], [SD CARD]/[AVCHD], [Built-inMemory]/[1080/50p] or [Built-inMemory]/ [AVCHD].
Page 100: Protecting Scenes/Still Pictures
Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ≥ Change the mode to Select the menu. : [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT] Touch the scene/still picture to be protected.
Page 101: Dpof Setting
Advanced DPOF setting Editing You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. (Copy still pictures recorded to the built-in memory to the SD card before setting DPOF.) ¬...
Page 102: [Hdc-Tmt750]
Advanced Relay scene combining Editing [HDC-TMT750] You can combine the relayed scene (l 67) in the built-in memory and the continued scene in the SD card to be one into the SD card. Relay recorded scene Relay scene combining A Built-in memory B SD card C Range of relay recording ≥...
Page 103 To cancel relay information [EDIT SCENE] # [RELAY INFO CANCEL] ≥ When the relay information is cancelled, combining of the relayed scenes will not be possible anymore. Combining of the relay scene cannot be performed if the available space on the SD card is less than the volume of the relayed scene in the built-in memory.
Page 104: With A Tv
≥ Use the AV multi cable (supplied) or HDMI mini cable (supplied/optional) and check the output settings. (l 107) ≥ Use of the following Panasonic HDMI mini cables is recommended to connect the unit to the HDMI terminal. ≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound.
Page 105 ≥ Check that the plugs are inserted as far as they go. ≥ Always use the supplied HDMI mini cable or a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other AV multi cables except the supplied one.
Page 106 HDMI mini cable, AV multi cable. Refer to the following support site for information about the Panasonic TVs that you can directly insert an SD card into the SD card slot on the TV and then play it back.
Page 107: Connecting With A Hdmi Mini Cable
Please read the AV amplifier and TV operating instructions for how to connect this unit to the AV amplifier and TV. ≥ If you connect this unit to a Panasonic AV amplifier and Panasonic TV that are compatible with VIERA Link, linked operations (VIERA Link) become possible. (l 110) ≥...
Page 108: 3D Video Playback
For the latest information on 3D compatible televisions and recorders that are capable of playing back 3D video recorded using the unit, see the support site below. http://panasonic.jp/support/global/cs/e_cam/index.html ¬ Change the mode to and touch the play mode select icon to select [SD CARD]/[AVCHD] or [Built-inMemory]/[AVCHD].
Page 109: Functions Not Available During 3D Playback
≥ You cannot play back 3D video on the LCD monitor of the unit. When you play back scenes recorded in 3D on the LCD monitor, they will be played back in 2D. ≥ You can also play back scenes recorded in 3D by date. Even if scenes are recorded on the same day, the unit will display the date separately when switching between 2D and 3D recordings.
Page 110: Playback Using Viera Link (Hdavi Control ™ )
(HDAVI Control What is the VIERA Link? ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable for automatic linked operations. (Not all operations are possible.) ≥...
Page 111 ≥ Available linked operations between this unit and a Panasonic TV is different depending on the types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating instructions of the TV for the operations that support on the TV.
Page 112: Copy/Dubbing
Copy/Dubbing Copying between SD card and With this unit/other products Built-in Memory [HDC-TMT750] Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and a built-in memory. ∫ Confirming remaining capacity on the copy destination [MEDIA STATUS] (l 43) allows you to confirm how much capacity remains on the SD card or built-in memory.
Page 113 Touch desired items following the screen display. ≥ It will return to the previous step by touching ≥ (When [SELECT SCENES] is selected) When touched, the scene/still picture is selected and the indication appears on the thumbnail. Touch the scene/still picture again to cancel the operation. ≥...
Page 114: Connecting A Dvd Burner To Copy To/Play Back A Disc
(supplied with DVD burner). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it. Preparing for copying/playing back We recommend using Panasonic DVD burner VW-BN2/VW-BN01. ∫ About discs that can be used for copying Disc type...
Page 115 Connect the AC adaptor (supplied with DVD burner) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. Connect this unit to the AC adaptor and change the mode to Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with DVD burner).
Page 116: Copying To Discs
Copying to discs ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ You cannot copy motion pictures together with still pictures or motion pictures in a different picture quality (AVCHD picture quality and conventional normal picture quality) to the same disc.
Page 117 ∫ About recording formats when copying motion pictures [AVCHD] ([HA]/[HG]/[HX]/[HE]): Copying scenes of 1080/50p picture quality The scenes recorded in 1080/50p by this unit will be copied after converting to AVCHD picture quality. ≥ When copying scenes recorded in 1080/50p, select the recording picture quality ([HA]/ [HG]/[HX]/[HE]).
Page 118 Approximate time for copying to a disc To copy motion pictures to the full capacity of a disc Copy time Disc type [AVCHD] [Standard] ([XP]) [Standard] ([SP]) Approx. DVD-RAM 50 min to 1 h 20 min Approx. DVD-RW Approx. Approx. 1 h 30 min to 35 min to 1 h 15 min 3 h to 5 h...
Page 119: Playing Back The Copied Disc
≥ The disc that was copied to can be played back by connecting this unit and a DVD burner. ≥ Do not turn off this unit or the DVD burner or disconnect the Mini AB USB Connection Cable while copying. Also, do not shake this unit or the DVD burner. ≥...
Page 120: Managing The Copied Disc
Managing the copied disc ≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 115) ∫ Formatting discs This is for initializing DVD-RAM, DVD-RW and +RW discs. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
Page 121: Dubbing With A Blu-Ray Disc Recorder, Video, Etc
Dubbing in high-definition picture quality You can dub using a Panasonic Blu-ray disc recorder or high-definition (AVCHD) compatible DVD recorder. ≥ Depending on the recorders or the media to be copied to, you may not be able to copy in high-definition (AVCHD) picture quality.
Page 122 ∫ Dubbing with a USB cable ≥ Use the AC adaptor to free you from worrying about the battery running down. ≥ Turn on the unit (This function is available in all modes). A USB cable (supplied) Connect the unit to the Blu-ray disc recorder or high-definition (AVCHD) compatible DVD recorder.
Page 123 ∫ Dubbing scenes recorded in 3D When dubbing with high-definition (AVCHD) picture quality, you can store 3D video. The video is recorded unaltered in side-by-side format. ≥ If the dubbed video does not change to 3D video, make the necessary settings on the TV. (For further details, please read the operating instructions for the TV.) ≥...
Page 124: Dubbing In Standard Picture Quality
Dubbing in standard picture quality Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to.
Page 125 ∫ Dubbing scenes recorded in 3D Copying unaltered as 3D video When [3D PLAYBACK] is [3D], the 3D video is recorded in side-by-side format. : [SETUP] # [3D PLAYBACK] # [3D] ≥ If the dubbed video does not change to 3D video, make the necessary settings on the TV. (For further details, please read the operating instructions for the TV.) Copying after conversion to 2D video Set [3D PLAYBACK] to [2D].
Page 126: With A Pc
With a PC What you can do with a Before using HD Writer AE 2.6T You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs (BD), DVD discs or SD cards using HD Writer AE 2.6T, the software installed in the supplied CD-ROM.
Page 127 Available function Data type Software required Copying data to a PC CD-ROM ≥ Scenes recorded in 3D will be copied unaltered (supplied): Motion as 3D video. HD Writer AE 2.6T picture and Copying in BD/AVCHD format still picture ≥ Scenes recorded in 3D will be copied unaltered as 3D video.
Page 128 ≥ Motion pictures that have been recorded on another device cannot be written to the software supplied with this unit. To write motion picture data recorded with the Panasonic High Definition Video Camera sold previously, use the HD Writer supplied with the unit.
Page 129: End User License Agreement
Further, Panasonic does not warrant that the operation of the Software Article 2 Use by a Third Party will be uninterrupted or error free. Panasonic Licensee may not use, copy, modify, transfer or any of its distributors will not be liable for...
Page 130: Operating Environment
With a PC Operating environment Before using ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible BD/DVD writer drive and media are necessary for writing to a BD/DVD.) ≥...
Page 131 Display High Colour (16 bit) or more (32 bit or more recommended) Desktop resolution of 1024k768 pixels or more (1280k1024 pixels or more recommended) Windows Vista/Windows 7: DirectX 9.0c compatible video card (DirectX 10 recommended) Windows XP: DirectX 9.0c compatible video card Compatible with DirectDraw overlay ™...
Page 132 ∫ Operating environment for the card reader function (mass storage) IBM PC/AT compatible PC Microsoft Windows XP (32 bit) Home Edition Service Pack 2/Service Pack 3 Microsoft Windows XP (32 bit) Professional Service Pack 2/Service Pack 3 Microsoft Windows Vista (32 bit) Home Basic Service Pack 1/Service Pack 2 Microsoft Windows Vista (32 bit) Home Premium Service Pack 1/Service Pack 2 Microsoft Windows Vista (32 bit) Business Service Pack 1/Service Pack 2 Microsoft Windows Vista (32 bit) Ultimate Service Pack 1/Service Pack 2...
Page 133: Setup
≥ When using Windows 7 or the following screen is not displayed automatically, select [Start] # [Computer] (or double-click on [Computer] on the desktop), and then double-click [Panasonic]. Click [Next]. Read the [End User License Agreement], then place a check beside [I accept the terms of the license agreement] if you agree to them and click [Next].
Page 134: Control Panel
When installation is complete, some notes will appear. Check the contents, then close the window. Select [Yes, I want to restart my computer now.], then click [Finish]. The PC must be rebooted for the application to work. ∫ Uninstalling HD Writer AE 2.6T Follow the steps below to uninstall any software applications that you no longer require.
Page 135: Connecting To A Pc
With a PC Connecting to a PC Setup ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) Connect this unit to the AC adaptor. ≥...
Page 136: To Disconnect Usb Cable Safely
≥ Depending on your PC’s settings, this icon may not be displayed. Select [USB Mass Storage Device] and click [Stop]. Verify [MATSHITA HDC-SDT750/SD USB Device] is selected and click [OK]. Verify [MATSHITA HDC-TMT750/SD USB Device] or [MATSHITA HDC-TMT750/MEM USB Device] is selected and click [OK].
Page 137: About The Pc Display
About the PC display When the unit is connected to a PC, it is recognised as an external drive. ≥ Removable disk (Example: ) is displayed in [Computer]. The following data will be recorded. We recommend using HD Writer AE 2.6T 1 Up to 999 still pictures in JPEG to copy or write back motion picture data.
Page 138: Using With A Pc
If you log on with a user name for a guest user account, the software cannot be used. (On the PC) Select [Start] # [All Programs] # [Panasonic] # [HD Writer AE 2.6T] # [HD Writer AE]. ≥ For details on how to use the software applications, read the PDF operating instructions of the software.
Page 139: If Using Mac
With a PC If using Mac Using with a PC ≥ HD Writer AE 2.6T is not available for Mac. ≥ iMovie’09 supported. For details about iMovie’09, please contact Apple Inc. ≥ iMovie’09 is not compatible with 1080/50p. 1080/50p scenes cannot be imported to a Mac. j For users who have , it cannot acquire the scenes recorded in 1080/50p.
Page 140: Others
Others Indications Indications only 1080/50p recording (l 51) 1080/50p ∫ Recording indications Built-in memory recording possible status Motion picture recording mode (White) Card recording possible status (Green) Recognising the card 0h00m00s 1h30m R 1h20m 1920 ¥/; (Red) Recording PRE-REC 1/100 ;...
Page 141: Red Eye Reduction *2
(White) Still picture recording icon High-speed burst shooting (l 81) (Red) Recording still picture Digital cinema colour (l 73) MEGA OIS (l 28) MEGA AF assist lamp (l 82) 3D recording (l 55) Zoom microphone (l 74) Focus microphone (l 74) Stereo microphone (l 74) Wind noise canceller (l 74) Bass setting (l 76)
Page 142 ∫ Playback indications ∫ Indication of connection to other devices /7/8/9/:/ 1/;/5/ D/E/;1/2; Accessing the card (l 136) Display during playback (l 32, 87) Accessing the built-in memory (l 136) Operation icon is displayed/ not displayed. (l 32) ∫ Confirmatory indications 0h00m00s Playback time (l 32) ––...
Page 143: Messages
≥ Use a battery that is compatible with this unit. (l 12) If using a Panasonic battery compatible with this unit, remove the battery and then insert it again. If the message appears even after repeating this several times, this unit needs repair.
Page 144: About Recovery
About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.) SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLE SCENES WILL BE DELETED.) ≥ The above message is displayed when abnormal management information is detected when the scenes are displayed in thumbnail.
Page 145: Troubleshooting
Others Troubleshooting Problem Check points This unit cannot be ≥ Charge the battery again to ensure it is sufficiently turned on. charged. (l 12) ≥ In cold places, the battery using time becomes This unit does not stay shorter. on long enough. ≥...
Page 146 Problem Check points This unit cannot be ≥ Remove the battery or AC adaptor, wait about operated though it is 1 minute and then reconnect the battery or AC turned on. adaptor. Then about 1 minute later, turn on the unit again.
Page 147 Problem Check points Colour balance of ≥ In a place with multiple light sources, such as a images is strange gymnasium or a hall, set the white balance setting to when recording in a (Indoor mode 2). If you cannot record clearly place such as a with the (Indoor mode 2), set it to...
Page 148 Problem Check points Colour or brightness ≥ Colour or brightness of the image may change, or of the image changes, you may see horizontal bars in the image when the or you may see object is recorded under fluorescent light, mercury horizontal bars in the light or sodium light, etc., but this is not a image.
Page 149 Problem Check points VIERA Link does not [Setting on this unit] work. ≥ Connect with a HDMI mini cable. (l 110) ≥ Press the MENU button, then touch [SETUP] # [VIERA Link] # [ON]. (l 110) ≥ Turn the unit off and then back on again. [Setting on other devices] ≥...
Page 150 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit.
Page 151: Cautions For Use
Panasonic Customer Care Do not extend the cords and the cables. Centre on 132600. Do not spray insecticides or volatile chemicals onto the unit.
Page 152: About The Battery
≥ Dust and other matter attached to the battery terminals should be removed. ≥ Please look after the data in your built-in memory carefully. Panasonic will not be held responsible in the unlikely case that private data is divulged. VQT3B52...
Page 153: About The Ac Adaptor
Prepare spare batteries when going out ≥ After use, be sure to disconnect the AC for recording. adaptor. (If it is left connected, a minute ≥ Prepare batteries appropriate to 3 to 4 amount of current is consumed.) times the period you are planning to ≥...
Page 154 When viewing 3D video, we recommend About 3D taking a break every 30 to 60 minutes. ≥ Viewing for extended periods may cause About 3D recording eye-fatigue. Attach the 3D Conversion Lens securely. Short-sighted or long-sighted persons, It must not be used with an insecure those with differences in the sight of their attachment.
Page 155 About the SD card LCD monitor/viewfinder When disposing of or giving away the SD ≥ When the LCD monitor gets dirty, wipe it card, note that: with a soft cloth, such as eye glass ≥ Formatting and deletion of this unit or cleaner.
Page 156: About Condensation
It should be noted before use that ≥ When a cold room has been warmed up Panasonic does not accept any quickly. responsibility for direct or indirect ≥ When cool wind from an air conditioner is problems which occur as the result of the directly blown onto this unit.
Page 157: About Copyright
LLC. concerned. ≥ “AVCHD” and the “AVCHD” Logo are This product is licensed under the AVC trademarks of Panasonic Corporation and patent portfolio license for the personal and Sony Corporation. non-commercial use of a consumer to (i) ≥ Manufactured under license from Dolby encode video in compliance with the AVC Laboratories.
Page 158: Recording Modes/Approximate Recordable Time
Others Recording modes/approximate recordable time ≥ SD cards are only mentioned with their main memory size. The stated times are the approximate recordable times for continuous recording.   Recording mode 1080/50p Picture size 1920k1080 1920k1080 1920k1080 1920k1080 1920k1080 4 GB 19 min 30 min 40 min...
Page 159: Approximate Number Of Recordable Pictures
Others Approximate number of recordable pictures ≥ SD cards are only mentioned with their main memory size. The stated number is the approximate number of recordable pictures. (In still picture recording mode) Aspect ratio 12.2 Picture size 4032k3024 3200k2400 2560k1920 640k480 Picture quality 512 MB...
Page 160 Aspect ratio 16:9 13.3 Picture size 4864k2736 3840k2160 3072k1728 Picture quality 512 MB 1 GB 2 GB 1100 4 GB 1420 1420 2200 SD card 8 GB 1100 1700 1700 2800 2800 4500 16 GB 2200 3400 3400 5600 5600 9000 32 GB 4500...
Page 161: Optional Accessories
Others Optional accessories Product numbers correct as of Aug. 2010. These may be subject to change. Some optional accessories may not be available in some countries. ∫ Attaching the battery pack AC adaptor (VW-AD21E/EB-K) holder kit Battery pack (lithium/VW-VBG130) To use the VW-VBG6 for this unit, the Battery pack (lithium/VW-VBG260) battery pack holder kit/VW-VH04 (optional) is required.
Page 162 ∫ Attaching the conversion lens/ ∫ Attaching the optional filter kit accessories on the shoe Attach the wide conversion lens adaptor (VW-W4607H; optional), the wide end The video DC light/VW-LDC103E (optional) conversion lens (VW-WE08H; optional), ND etc. can be mounted on the shoe adaptor filter or MC protector of the Filter kit (supplied).

This manual is also suitable for:

Hdc-tmt750

Panasonic HDC-SDT750 Operating Instructions Manual

Information for Your Safety

Accessories

Parts Identification and Handling

Power Supply

Recording to a Card

Turning the Unit On/Off

Selecting a Mode

Adjusting LCD Monitor/ Viewfinder

Setting Date and Time

Before Recording

Recording Motion Pictures

Recording Still Pictures

Intelligent Auto Mode

Motion Picture/Still Picture Playback

Using the Menu Screen

Using the Setup Menu

Using with the Remote Control

Zoom In/Out Function

Image Stabilizer Function

AF/AE Tracking

1080/50P Recording

Recording 3D Video

Recording Functions of Operation Icons

Recording Functions of Menus

Manual Recording

Playback Operations

Various Playback Functions

Deleting Scenes/Still Pictures

DPOF Setting

Watching Video/Pictures on Your TV

3D Video Playback

Playback Using VIERA Link (HDAVI Control ™ )

Copying between SD Card

Connecting a DVD Burner to Copy To/Play Back a Disc

Dubbing with a Blu-Ray Disc Recorder, Video, Etc

What You Can Do with a PC

Operating Environment

Installation

Connecting to a PC

Starting HD Writer AE 2.6T

If Using Mac

Messages

Troubleshooting

Cautions for Use

About Copyright

Recording Modes/Approximate Recordable Time

Approximate Number of Recordable Pictures

Optional Accessories

Quick Links

Related Manuals for Panasonic HDC-SDT750

Summary of Contents for Panasonic HDC-SDT750