Panasonic HDC-SX5P Operating Instructions Manual page 136

Others
CANNOT READ DISC.
PLEASE CHECK
CONDITION OF DISC.
CHECK CARD.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
CARD LOCKED.
NOW ACCESSING.
PLEASE DO NOT REMOVE
CARD.
CARD FULL.
CANNOT OPERATE THIS
FUNCTION IN THIS MODE.
TOP MENU COULD NOT
BE CREATED.
CANNOT DIVIDE. THE
NUMBER OF SCENES IS
FULL.
CANNOT OPERATE.
TEMPERATURE IS HIGH.
CANNOT OPERATE.
TEMPERATURE IS HIGH.
PLEASE TURN OFF AND
WAIT A WHILE.
THIS BATTERY CANNOT
BE USED.
AGS MODE ON-REC
PAUSED
PUSH THE RESET
SWITCH.
CHECK THE DISC AFTER
PUSHING THE RESET
SWITCH TO REPAIR THE
DATA.
136
VQT1J42
There are scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 30) If
the disc is scratched, insert a new one.
This card is not compatible or it cannot be recognized by the unit.
An 8 MB or 16 MB SD card on which motion pictures cannot be
recorded is inserted.
The write protection switch on the SD card is set to LOCK. (l 29)
The data is being processed. Close the card slot cover and wait for
a while.
The SD card is full so no further data can be recorded. Delete
unnecessary files (l 86, 90) or insert a new SD card.
PRE-REC cannot be set in disc recording mode.
Or, you are trying to copy a disc in STD playback mode.
Creating a top menu has failed.
There may be scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 30)
The disc or SD card is full or the number of scenes has reached the
maximum limit so no further data can be divided. Delete
unnecessary scenes (l 86).
The temperature of the unit is high so it cannot be operated. Turn off
the power, wait until the unit cools and then turn on the power again.
Use a battery that is compatible with this unit. (l 32)
You are attempting to connect an AC adaptor not compatible with
this unit. Use the supplied AC adaptor. (l 35)
If using a Panasonic battery compatible with this unit (l 32), eject
the battery and then insert it again. If the message appears even
after repeating this several times, this unit needs repair. Detach the
power and consult the dealer who you purchased this unit from. Do
not attempt to repair it by yourself.
The AGS function is activated. (l 52)
An irregularity in the unit has been detected. Press the RESET
button to restart the unit. (l 145)
There may be scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 30) If
the disc is scratched, insert a new one.