Panasonic HDC-SX5P Operating Instructions Manual page 104

With other products
5
Operate with the remote control for the TV.
1)
1) Press the button up, down, left or right to select a scene or file to be played back, and then press
the button in the center to set it.
2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
A Operation icons
B Display operation icons
C Cancel operation icons
D Display/cancel operation icons
≥ The playback operation is performed the same as on this unit.
jPlaying back motion pictures (l 79)
jPlaying back still pictures (l 84)
To cancel EZ Sync
Press the MENU button, then select [SETUP] # [EZ Sync] # [OFF] and press the cursor button.
≥ If you are unsure whether or not the TV you are using are compatible with EZ Sync, read the
operating instructions for the TV.
≥ Available linked operations between this unit and a Panasonic TV is different depending on the types
of Panasonic TVs even if they are compatible with EZ Sync. Refer to the operating instructions of the
TV for the operations that support on the TV.
≥ Operation is not possible with a cable that is not based on the HDMI standard.
We recommend using Panasonic cables.
Part numbers: RP-CDHG15 (1.5 m/4.9 feet), RP-CDHG30 (3.0 m/9.8 feet), RP-CDHG50 (5.0 m/
16.4 feet) etc.
104
VQT1J42
™ ™
(HDAVI Control
2)
B
)
A
DISPLAY ON/OFF
C
D