Panasonic CF-73 Series Reference Manual page 95

Dealing with Problems (Advanced)
Keyboard
Only numbers can be inputted
Only capital letters are being input
How to input European characters (ß,
à, ç), symbols or Euro Currency
Symbol is unclear
Windows 2000
After resuming, input keys do not work
properly
Network
Unable to connect to a network
Check whether the indicator
keyboard mode. To disable the ten-key mode, press NumLk.
Check whether the indicator
mode. To disable the Caps Lock mode, press Caps Lock.
Display the character map and point to the desired font name, such as
European fonts, and select it with the following the procedure.
Windows XP
Select [Start] - [All Programs] - [Accessories] - [System Tools] - [Character
Map].
Windows 2000
Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map].
When the computer enters standby or hibernation mode while Alt, Ctrl or
Shift are held down, these keys may remain in "pressed" mode when the
computer resumes operation. Pressing these keys once will return the keys to
normal.
Confirm that either [Modem], [LAN] or [Wireless LAN] is set to [Enable] in the
Setup Utility.
When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking
your system administrator or the person in charge of the network.
If the standby or hibernation mode is entered, the computer may have to be
restarted.
If the link lamp on the HUB unit is not on and the network cannot be accessed,
set the speed to match the HUB unit. (
is on. If it is on, the computer is in ten-key
is on. If it is on, the computer is in Caps Lock
page 68)
95