Function Screen - Panasonic AJ-HDC20A P Operating Instructions Manual

Setting menu screens

FUNCTION screen

The VTR's functions are set on this screen.
Variable
Item
range display
NEWS REC OFF USER
MODE 0.2 ENG
:
2.0
HUMID OPE ON USER
OFF ENG
REC START ALL USER
NORMAL ENG
PAUSE TIMER 10 USER
20 ENG
30
60
RETAKE MODE ON USER
OFF ENG
The underlining in the variable range column indicates the setting in the preset mode.
(VTR MAIN MENU)
VF
Remarks
For selecting the VTR
START button
acknowledgment time
during recording.
OFF:
The pressing of the VTR
START button is
acknowledged
immediately, recording is
stopped, and the unit is set
to the REC PAUSE mode.
0.2—2.0:
The pressing of the VTR
START button is not
acknowledged and
recording is continued for
the time set (in increments
of 0.2 sec.).
For selecting the VTR
operation when
condensation has formed.
ON : Operation is
continued as usual.
OFF : Operation of all
controls except the
POWER switch and
EJECT button is
inhibited.
For selecting
acknowledgement of recording
started by the VTR START
button.
ALL:
The start of the recording is
acknowledged regardless of
the VTR mode.
NORMAL:
The start of the recording is
acknowledged only in the
STOP (POWER SAVE) mode
and REC PAUSE mode.
For selecting the amount of
time REC PAUSE is to be held.
10/20/30/60: 10, 20, 30 or 60
minutes.
Functions for rewinding
the tape to the position
where recording started.
ON : The RETAKE
function works.
OFF : The RETAKE
function does not
work.
<Note>
The RETAKE function is
set OFF when the unit's
power switch has been set
to ON.
Variable
Item
range
HD SDI OUT ON
SIDE SW
AUTO
OFF
INTERVAL REC ON
MODE OFF
INTERVAL REC 00s10f
TIME :
59s29f
INTERVAL 00h00m02s
PAUSE TIME :
23h59m59s
95
VF
Remarks
display
USER For controlling the output
ENG signals of the HD SDI OUT
connector.
However, ON or OFF
cannot be selected for
these signals during
recording: the status prior to
the start of the recording is
maintained.
ON:
The signals are forcibly
output. However, the
signals are output in the
EE/PB mode when the
MONITOR OUT SDI
switch on the side panel is
set to OFF.
SIDE SW:
The signals are not output
when the MONITOR OUT
SDI switch on the side
panel is set to OFF.
AUTO:
The signals are output
when the connector has
been connected to the
output connector.
However, the signals are
output in the EE/PB mode
when the MONITOR OUT
SDI switch on the side
panel is set to OFF.
OFF:
The output is stopped.
USER For selecting the
ENG intermittent recording
mode.
ON:
Intermittent recording is
performed.
OFF:
Intermittent recording is
not performed.
<Note>
Intermittent recording is
set OFF when the unit's
power switch has been set
to ON.
USER For setting the REC time for
ENG intermittent recording.
<Note>
When REC time is set at
less than 1 second, the
initial recording time will
be 1 second.
USER For setting the REC
ENG PAUSE time for
intermittent recording.