Audio Function Section - Panasonic AJ-HDC20A P Operating Instructions Manual

Parts and their functions

Audio function section (1)

1 MIC IN (microphone input) jack (XLR, 3-pin)
Connect the microphone (optional accessory) here.
The power for the microphone is supplied from this
jack.
2 AUDIO LEVEL CH1/CH2 (audio channel 1 & 2
recording level adjustment) controls
When the AUDIO SELECT CH1/CH2 switch 3 is
set to MAN, the recording level of audio channels 1
and 2 can be adjusted using these controls.
3 AUDIO SELECT CH1/CH2 (audio channel 1 & 2
automatic/manual level adjustment selector)
switch
This is used to select the method for adjusting the
audio levels of audio channels 1 and 2.
AUTO : Set here for automatic adjustment.
MAN : Set here for manual adjustment.
4 AUDIO IN (audio input selector) switch
This is used to select the input signals to be
recorded on audio channels 1 and 2.
FRONT : The input signals supplied from the
microphone which has been connected to
the MIC IN jack 1 are recorded.
REAR : The audio input signals supplied from the
audio component
connected to the AUDIO IN CH1/CH2
connectors 5 is recorded.
1
which has been
7
5 AUDIO IN CH1/CH2 (audio input channel 1 & 2)
connectors (XLR, 3-pin)
An audio component or microphones are connected
here.
6 LINE/MIC/+48V (line input/mic input/mic input +
48V) selector switch
This is used to switch the audio input signals from
the audio component which has been connected to
the AUDIO IN CH1/CH2 connectors 5.
LINE : The audio input signals from the audio
component serving as the line input are
selected.
MIC : The audio input signals from the internal
power supply type of microphone are
selected. (The phantom mic power is not
supplied from the unit.)
+48V : The audio input signals from the external
power supply type of microphone are
selected. (The phantom mic power is
supplied from the unit.)
7 CUE switch
CH1 : The audio CH1 signals are recorded on the
cue track.
MIX : Audio CH1 and CH2 mixed signals are
recorded on the cue track.
CH2 : The audio CH2 signals are recorded on the
cue track.
<Note>
This switch can be made ineffective using the VTR
MAIN MENU. (See page 99)
10
2
3
4
6
5