Cleaning Instructions - Wells WB2WHNTB Owner's Manual

IMPORTANT:
Carbon Cleaner or Waffle
baker cleaner can damage
the protective coating on
the grids. DO NOT use any
cleaner other than mild soap.
CAUTION:
ELECTRIC
SHOCK
HAZARD
DO NOT submerge the waffle
baker in water. If internal
components become wet, the
operator may suffer electrical
shock, and the waffle baker
will be damaged.
CLEANING INSTRUCTIONS (continued)
PREPARATION
Unplug appliance from electric power
FREQUENCY
As needed
TOOLS
1" Bristle Brush, Stiff Fiber Brush
Clean Soft Cloth / Sponge
REMOVE CARBONIZATION FROM GRIDS
1. Turn power off the unit.
2. While unit is still warm, take a clean cloth, get it wet and
wring the water out.
3. Place on the lower grid
4. Close the upper grid and allow the appliance to stand for
several hours, or overnight, depending upon the extent of the
carbonization.
5. Remove cloth, using a non-metalic bristle brush (rated for
high temp) loosen any carbon material from the grids.
DO NOT USE ANY METAL BRUSHES ON COATED GRIDS, IT
WILL DAMAGE THE COATING.
5. Clean the outside of the Waffle Baker by wiping it with a soft,
clean cloth dampened with warm water and a mild detergent.
NEVER USE AN ABRASIVE CLEANSER.
6. Rinse by wiping with a soft, clean cloth dampened with clean
water. Allow to air dry.
7. Re-seasoning is not necessary with coated grids.
Procedure complete
7