Assembly Fan Module - ViewSonic Pro8400 Series VS13647 Service Manual

Step
21

3.3 Assembly FAN Module

Step
1
Fan Sponge*4
ViewSonic Corporation
Figure
P0335-7010-01*4
Figure
Fan1 Fan2
Fan Pad
23
Description
1. Loosen the four screws on
the Lens.
2. Remove the Lens carefully.
Description
Assemble Fan1(J2394-0143-01) and
Fan2 (J2394-0144-00 ):
1. Paste the Fan Pad (P4E38-1070-00)
on the middle of it.
2. Paste the Fan Sponge*4
(P4G38-1180-00) on the top and
bottom of it as picture shown.
Confidential - Do Not Copy
Pro8400