Heat Sink - HP Chromebook Maintenance And Service Manual

Heat sink

Description
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the computer feet (see
5. Remove the keyboard/top cover (see
6. Remove the WLAN module (see
7. Remove the Hall sensor board (see
8. Remove the connector board and cable (see
9. Remove the battery (see
10. Remove the speakers (see
11. Remove the system board (see
Remove the heat sink:
1. Turn the system board over to show the heat sink.
2. Remove the four Phillips screws (1) that secure the heat sink to the system board.
3. Remove the heat sink (2).
Computer feet on page
Keyboard/top cover on page
WLAN module on page
Hall sensor board on page
Connector board and cable on page
Battery on page 30).
Speakers on page 32).
System board on page
23).
24).
27).
28).
33).
Component replacement procedures
Spare part number
900040-001
29).
35