Table of Contents
Advertisement
TG5831_5832AL.book Page 34 Monday, March 14, 2005 4:28 PM
Programmable Settings
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There are
3 tones and 4 melodies. The default
setting is "Tone 1".
1
Press {MENU}.
2
Scroll to "Ringer setting" by
pressing {V} or {^}, then press {>}.
Ringer setting
3
Scroll to "Ringer tone" by pressing
{V} or {^}, then press {>}.
Ringer tone
4
Press {V} or {^} repeatedly to select
the desired setting.
Ringer tone
1=Tone 1
KBack
L You can also select the ringer tone by
pressing {1} to {7}.
L If the ringer volume has been turned
off, the handset will not ring.
5
Press {Save}, then press {OFF}.
Note:
L If you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
34
Handset interrupt tone
This tone lets you know when you receive
a call while you are on an intercom call
(page 29).
"2" (default): The tone will sound 2 times.
"On": The tone will sound for as long as the
line rings.
"Off": Turns this feature off.
1
Press {MENU}.
2
Scroll to "Ringer setting" by
pressing {V} or {^}, then press {>}.
3
Scroll to "Interrupt tone" by
pressing {V} or {^}, then press {>}.
4
Press {V} or {^} repeatedly to select
the desired setting.
5
Press {Save}, then press {OFF}.
dB
SaveL
Advertisement
Table of Contents
