Monitoring incoming calls
While a call is being recorded, you can monitor it through the base unit speaker.
• To increase the speaker volume, press VOL. [ ]. To decrease volume, press
VOL. [ ].
To answer the call, press [
Listening to Messages
You can see the total number of recorded messages on the base unit display.
When new messages have been recorded, the NEW MESSAGE indicator flashes.
Voice Day/Time Stamp: During playback, the unit will announce the day and
time when each message was recorded (p. 12).
Using the Base Unit
To play back messages
Press [MESSAGE/SLOW TALK].
• The unit announces the number of new
messages and only new messages are
played back.
• During playback, the display shows the message number.
• At the end of the last message, "End of final message" is heard. The unit will
announce the remaining recording time if it is less than 3 minutes.
• When you have no new messages, the unit announces "No new messages. All
message playback" and plays back all messages.
• When you have no messages, the unit announces "No messages".
For assistance, please call: 1-800-211-PANA(7262)
Automatic Answering Operation
] or [
] on the handset. The unit will stop recording.
Base Unit
NEW MESSAGE
Indicator
[MESSAGE/
SLOW TALK]
41