Programming
Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods:
– scrolling through the display menus (page 20)
– using the direct commands (page 22)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
= Base unit / Y Handset
1
{MENU}
2
Press {V} or {^} to select the desired main menu. i {SELECT}
3
Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4
Press {V} or {^} to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {■} (EXIT) on the base unit or {OFF} on the handset.
Note:
L See page 22 for the default settings.
Base unit
Main menu
Caller list
W
Set answering
s
Initial setting
"
Customer support
!
*1 If you program these settings using the base unit, you do not need to program the same item using a
handset.
20
For assistance, please visit http://www.panasonic.com/help
Sub-menu 1
–
Screen call
Ringer setting
*1
Call block
LCD contrast
Caller ID edit
Display language
–
Sub-menu 2
–
–
Ringer volume
Ringer tone
Silent mode
– On / Off
– Start / End
–
–
–
–
–
Page
28
31
14
–
25
26
–
29
12
–