Caller Id Number Auto Edit Feature - Panasonic KX-TG1062 Operating Instructions Manual

Editing a caller's phone number
before calling back
You can edit a phone number in the caller list by
removing its area code and/or the long distance
code "1".
= Base unit / Y Handset
1
Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {V}/{^}: "Caller
list" i {SELECT}
2
{V}/{^}: Select the desired entry.
3
Press {EDIT} repeatedly until the phone
number is shown in the desired format.
1
Local phone number
Example:
321-5555
2
Area code – Local phone number
Example:
555-321-5555
3
1 – Area code – Local phone number
Example:
1-555-321-5555
4
Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
For assistance, please visit http://www.panasonic.com/help

Caller ID number auto edit feature

Once you call back an edited number, the unit
remembers the Area Code and Format of the
Edited Number. Next time when someone calls
from the same Area Code, caller information is
customized by the unit as follows:
– When the call is being received, the Caller ID
number is displayed in the same Format as the
Edited Number.
– After the call is ended, the phone number of the
caller, when reviewed from the Caller list, is
displayed in the same Format as the Edited
Number.
For example, you can use this feature to set the
unit to ignore the area code of callers in your area,
so that you can call these local numbers using
caller information without dialing the area code.
To activate this feature, you must edit an entry in
the caller list, then call that number. After that,
phone numbers from that caller's area code are
edited automatically.
Note:
L Phone numbers from the 4 most recently edited
area codes are automatically edited.
L If you move to another area, you can turn this
feature off to erase previously edited area
codes. To use this feature again, turn it on and
reprogram the area codes you want to edit once
again.
Turning Caller ID auto edit on/off
= Base unit / Y Handset
1
{MENU} i {#}{2}{1}{4}
2
{V}/{^}: Select the desired setting.
3
{SAVE}
4
Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Caller ID Service
29