Multi-Unit User Operation - Panasonic KX-TCD420AL Operating Instructions Manual

Handset Registration
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered. Additional KX-A142AL handsets are available to
purchase separately. Up to 6 handsets can be registered to a single base unit. Using
additional handsets allows you to have an intercom call while simultaneously conducting
a call to an outside line.
Handset must be registered within 1 minute after pressing PAGE button. If over
1 minute, press
Charge the optional handset batteries for 7 hours before initial use.
1 2
Press MENU.
4 5
Press and hold
(for about 5 seconds) until the green indicator flashes.
Press
If all registered handsets start ringing (Paging),
RIGHT.*1
press
6
Search/Select desired
base unit number
available to register
the handset.
• To exit the operation, press
*1 If a handset has been already registered to 4 base units, "MEMORY FULL" is
displayed.
: Handset Registration to a Base Unit
then start over again.
3
Search/Select
"SETTING HS".
to stop paging then start over again.
7
4-digit Base
Unit PIN after
is
"BS PIN"
displayed.
Factory preset 0000
any time.

Multi-unit User Operation

Search/Select
"REGISTRATION".
on the Base Unit
8
Press OK.
"REGISTER HS"
When a handset is
registered successfully,
a confirmation tone
sounds and icon
lights.
31