Pager Call - When The Unit Receives A Fax Or Voice Message - Panasonic KX-FPC165 Operating Instructions Manual

Pager call - when the unit receives a fax or
voice message!
This feature allows your unit to call your pager when your unit receives a fax document or an
incoming voice message.
MENU
1 Press
Display:
Press , then
2
3 Press or
If this feature is not required, select "OFF".
4 Press SET .
5 Enter your pager number up to 30 digits.
Example:
Press SET .
6
7 Enter your pager access code up to 10 digits
if required.
Example:
Press SET .
8
The default code 07734 will show "Hello!"
on your pager.
If you want to change this message, enter
your message up to 30 digits.
9 Press SET .
The unit will dial the stored number.
.
SYSTEM SET UP
PRESS NAVI.[
7 0 .
PAGER CALL
MODE=OFF
to select "ON".
PAGER CALL
MODE=ON
NO.=
NO.=12025551234
PIN=
PIN=12345678
MSG.=07734
PAGER TEST
Receiving Faxes
Check that your pager received
10
the pager test call.
I H
]
Press
11
[±]
[±]
MENU
DIGITAL SP-PHONE
Note:
If you have subscribed to a Caller ID service,
instead of the message you entered in
step 8, your pager will display the caller's
telephone number, followed by "11" or "22".
11: When your unit receives a voice message.
22: When your unit receives a fax document.
If you have not entered a message in step 8,
your pager will only display "11" or "22".
!
DIGITAL SP-PHONE
SET
.
57