Battery Charge; Handset) Battery Charge - Panasonic KX-FPC165 Operating Instructions Manual

Setup (Handset)
Battery charge)
Place the handset on the cradle of the base unit
for about 4 hours before initial use.
Slowly place the handset on the cradle vertically
( ), then lean it back (
1
A beep will sound, and the following will be
displayed for an instant time on the base unit.
Display:
If the base unit is in use, a beep may not sound
and the above display may not be shown.
Note:
Clean the handset and the base unit charge
contacts with a dry cloth once a month, or the
battery may not charge properly.
The battery cannot be overcharged.
Battery strength
You can check the battery strength on the
handset display while the handset is in use, or for
about 5 seconds after using the handset.
Handset display
(flashing)
Battery life
If your Panasonic battery is fully charged;
— the battery life will last up to 8 hours while in
use (in conversation).
— it will last for up to about 21 days while not in
use (off the base unit).
Battery life may vary depending on usage
conditions and ambient temperature.
22
).
2
CHARGING
The display will show
the date and time.
Battery strength
Fully charged
Medium
Low
Needs to be recharged.
For fax advantage assistance, call 1-800-435-7329.
Handset
2
1
Charge
contacts
Display
Recharge
Recharge the battery when:
— the handset beeps intermittently while it is in
use, or
— the following message is shown or "
flashes on the handset display.
Display:
Recharge the handset battery for more than 15
minutes, or the display will continue showing the
above indication.
Automatic security code setting
Whenever you place the handset on the base
unit, the unit will automatically select one of a
million security codes. These codes help to avoid
unauthorized use of your telephone line by
another cordless telephone.
"
Recharge