Table of Contents
Advertisement
Operating the answering device from a remote
telephone
(cont.)
Erasing incoming messages from memory
To erase a specific message
J D
Press
while listening to the message you want
to erase.
—A long beep and the voice guide will be heard.
Then the unit will continue with the next message.
To erase all messages
J E
Press
to erase all messages.
—A long beep and the voice guide will be heard.
Other remote operations
To monitor the room sound
You can monitor the sound in the room where the unit is installed.
F
Press
.
—You can monitor the room sound for about 30 seconds.
Note:
¡After 30 seconds, a beep sounds. To continue monitoring, press
To record a marker message
After playing back the recorded messages, you can leave an additional message.
1. Wait for the voice guide to tell you that the
remote operation has ended.
2. Wait about 10 seconds until the voice guide is
played.
3. Leave a message after the beep.
50
Voice guide example:
The message has been erased.
Voice guide example:
All messages have been erased.
F
again within 10 seconds.
Voice guide example:
All messages have been played.
Please leave your name and message
after the beep.
Advertisement
Table of Contents
