Table of Contents
Advertisement
Routine care
Checking the remaining film
Press (FILM\REMAINING) while the unit is idle. The display indicates the approximate amount of remaining
film.
FILM E
F
FILM E
F
Replacing the film or film cartridge
When the unit detects the end of the film, one of the following messages will be displayed:
FILM NEAR EMPTY
FILM EMPTY
To order replacement parts, see page 6.
1
Slide the front cover open lever forward to unlock
the front cover and lift open.
2
Remove the film cartridge.
¡If you have purchased a film cartridge (Model no.
KX-FA135) for replacement, skip to step 9.
¡To replace only the film, go to step 3.
3
Unlock the four gears by (A) pulling the top side
gears (blue and green) forward and (B) pushing
back the bottom side gears (green). Remove the
used film.
4
Remove the four gears from the used film cores.
Caution:
¡The film is not reusable. You can order a new
film for replacement through your nearest
authorized Panasonic dealer.
When the film indicator points to this position, the remaining film will print up to
25 pages of letter size documents. Prepare a new film or film cartridge for
replacement.
The remaining film prints approx. 15 letter size documents. Prepare a new film or
film cartridge.
The film is empty. Replace the film or film cartridge with a new one.
Film cartridge
Top side gears
Blue gear
A
B
Green gear
Bottom side gears
Gears
Front cover
open lever
Green
gear
A
B
Green gear
Gears
Film cores
(continued)
99
Advertisement
Table of Contents
