Placing Originals (Copy)
■ ■ ■ ■ ■ How to Place Originals
●
On the ADF
ADF Tray
Original Guides
Adjust to the original's width
Notice for ADF
●
Once the originals are set, press Start key, and do not touch the originals as it may cause them to jam.
●
Before setting the originals on the ADF, make sure they are free of clips or staples.
Originals that cannot be used
●
Drawing papers, Transparencies, Labeling paper, Heavy weight papers, Thin Art papers, Film, Thermal
papers
Inappropriate Originals
●
Papers which are curled, ripped, creased, folded, punched, glued, stapled or self adhesive.
●
Originals of assorted (mixed) width size (except for the combination of Ledger and Letter)
●
Paste-ups
●
Pressure sensitive or carbon backed papers
●
Paper with excessive curl
●
Stapled originals
●
Freshly printed copies from a laser printer which is still wet with color ink or whiteout.
●
Originals with fresh White-Out (Liquid paper correction fluid)
●
On the Platen
Notice for Platen
Align the original to top left corner mark (
●
If the original is not positioned properly, a portion of the
original may not be copied.
●
For originals smaller than 5.5" x 8.5" (Invoice) size,
position the original within the 5.5" x 8.5" area and
select 5.5" x 8.5".
Ex: Book Original
Set the originals up to the
upper limit indicator.
Upper Limit
Indicator
Upper Guide
).
When copying a thick Booklet, open the
ADF and verify that the ADF Hinge was
returned to original position if the rear of
the ADF was raised.
1
3
2
4
Original Guides
INV
LTR
INV
LTR
INV
INV
LTR
LGL
LTR
LDR
Ex: Sheet Original
LGL
LDR
21