TP-Link Archer T6E User Manual page 48

Archer T6E/T8E/T9E
Internet Connecting Share (ICS): Specify a connection through which devices connected

to your AP can access the Internet.
SSID: Enter the name for your soft AP (for example, Jone) so that others can know which

AP is yours when trying to connect to it.
Security Type: The security type here is set to be WPA2-PSK which is based on 802.11i

and uses AES (Advanced Encryption Standard) instead of TKIP. It was designed to
improve the security features of WEP. WPA2-PSK uses a passphrase or key to
authenticate your wireless connection. You needn't make any configuration here.
Encryption Type: The encryption type here is set to be AES.

Security Key: Enter the Key in the field to make your AP security enabled. It is

recommended that you specify another key instead of the default key 12345678. Only by
entering the corresponding key can other computers establish a successful connection with
your AP.
IP Address: Here displays the IP address of the SoftAP.

Having completed the above settings, click Apply; then Figure 5-4 will pop up, where you click
OK to make Soft AP mode take effect.
802.11AC Wireless Dual Band PCI Express Adapter User Guide
38