TP-Link Archer T6E Quick Installation Manual

Quick

Installation Guide

AC1300 Wireless Dual Band PCI Express Adapter
MODEL NO. Archer T6E
7106505268 REV1.0.0
1
Connect to a Computer
Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
2
Install Driver and Utility
You can also download the driver and utility at www.tp-link.com
A:
Insert the CD and run the Autorun.exe from the pop-up
Autoplay window.
Note: In some operating systems, the CD screen will pop up automatically.
Otherwise, run the CD manually.
3
Join a Wireless Network
Option 1: Via TP-LINK Utility
Select your preferred wireless network from the pop-up utility window
and click Connect. The symbol
Status WPS Network
Network Name(SSID) Security
TP-LINK_A
WPA/WPA2-Personal
Connect automatically
34567_TEST
WPA/WPA2-Personal
abcdef_0903
None
AAAAAA
None
PCI-E slot
indicates a successful connection.
Profile Advanced
Network Na
Channel Signal
TP-LINK_A
6 (2.4G)
Connect
34567_TEST
149 (5G)
9 (2.4G)
5 (2.4G)
For more information, please visit our website: http://www.tp-link.com
Insert the adapter into your computer by following these steps:
1.Turn off your computer, unplug the power cord and other connected
peripheral devices to your computer.
2.Remove the case panel. Locate an available PCI-E slot and remove its
slot cover.
3.Carefully insert the adapter into the PCI-E slot and secure it with the
retaining screw.
4.Replace the case panel.
5.Reconnect the power cord and turn on your computer.
B:
Select Archer T6E and click Install Driver and Utility, then follow the
InstallShield Wizard to complete the installation.
Option 2: Via Windows Wireless Utility
With the TP-LINK Utility closed, you can use the Windows built-in
Wireless Utility to join a wireless network.
Setup Wizard
Archer T6E
Install Driver and Utility
User Guide
Browse CD EXIT
©2015 TP-LINK