Multilingual Service; No Answer Coverage Mode - Panasonic KX-TVM50 Feature Manual

2.2.35 No Answer Coverage Mode

Conditions
•
In order to display the number of unplayed messages on the display:
–
A compatible Panasonic Proprietary Telephone with 6-line display (such as the KX-T7636) must be
used.
–
The VPS must be connected using DPT Integration to a KX-TDE series PBX or a KX-TDA series PBX
(MPR Version 2.1 or higher).
–
The subscriber must have his or her own extension.
–
The Message Manager's extension number must be assigned as Operator 1 in the Day Mode.
•
Extensions assigned as operators can be called by dialling [0], however, when setting this feature the
extension number (not "0") must be specified.
Programming Manual References
2.5.4.7 Message Waiting Notification
Subscriber's Manual References
5.8 Message Waiting Notification
Manager's Manual References
3.3 Setting Up Message Waiting Notification

2.2.34 Multilingual Service

Description
Allows a maximum of 3 languages (KX-TVM50) or 10 languages (KX-TVM200) to be used for system prompts.
The System Administrator can select 3 languages (KX-TVM50) or 5 languages (KX-TVM200) for the
multilingual selection menu, and assign a key for each language in the menu. Callers can select the desired
language by pressing the assigned key. The language used for system prompts heard by subscribers is
determined by Class of Service (COS).
Programming Manual References
2.5.4.2 Prompt Setting
Manager's Manual References
3.6 Recording Messages
2.2.35 No Answer Coverage Mode
Description
Determines how calls will be handled when an operator does not answer within the time specified for "Operator
No Answer Time". One of the following can be set for each operator, unless otherwise noted.
Caller Select: Callers may leave a message or call another extension.
Leave Message: Callers may leave a message in the operator's mailbox.
28 Feature Manual Document Version 2.1 2008/04