Connecting To The Drain - Beko HPD 24400 W Owner's Manual

3.8 Connecting to the drain

In products equipped with condenser unit,
water accumulates in the water tank during
the drying cycle.
Connecting the water drain hose
1-2 Connect one end of the drain hose
supplied with the dryer to the
connection point from where you
removed the hose of the product in
previous step.
3 Connect the other end of the drain hose
directly to the wastewater drain or to
the washbasin.
1
3
A
Hose connection should be made
in a safe manner. Your drain
house will be flooded if the hose
comes out of its housing during
water discharge.
C
Water drain hose should be
attached to a height of maximum
80 cm.
C
Make sure that the water drain
hose is not stepped on and it is
not folded between the drain and
the dryer.
EN / 14
1 2
Dryer / User Manual