2. Displaying Basic Information
Use the following commands in the "Privileged mode" to display basic information
of the Switching Hub.
Basic information display command
Privileged mode
PN25249 Local Management System
Main Menu -> General Information
System up for:
Boot / Runtime Code Version: xx.xx.xx.xx/ xx.xx.xx.xx
Hardware Information
Version:
DRAM / Flash Size:
DRAM User Area Size:
Administration Information
Switch Name:
System Address Information
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
Press any key to continue...
Fig. 2-2 Execution example of the system information display command
show sys-info
xxxday(s), xxhr(s), xxmin(s), xxsec(s)
Version1
128MB / 32MB
Free: xxxxxxxx bytes / Total: xxxxxxxx bytes
xx:xx:xx:xx:xx:xx
0.0.0.0
0.0.0.0
0.0.0.0
Fig. 2-1 Displaying basic information
(show sys-info)
12