Table of Contents
Advertisement
4.6.8.c. Displaying MAC address table by port
On the Forwarding Database Information Menu, press "P." The command
prompt changes to "Enter Port Number>." Specifying a port number opens the
Display MAC Address by Port screen as shown in Fig. 4-6-20. In this screen, you
can display MAC address table by port.
PN27089K/PN27089KA Local Management System
Forwarding Database Menu -> Display MAC Address by Port
Age-Out Time: 300 Sec.
MAC Address
-----------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Set [A]ge-Out Time
Command>
Enter the character in square brackets to select option
Fig. 4-6-20 Displaying MAC address table by port
Screen Description
Age-Out Time:
Displays a time to store MAC address table. It is equal to the time after
receiving the last packet. The factory default setting is 300 seconds (5
minutes).
Select Port:
Displays the selected port number.
MAC Address
Displays a MAC address in MAC address table.
Port
Displays a port to which the MAC address has belonged.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next port.
P
Display the previous page.
Press "P" to display the previous port.
A
Set a time to store MAC address.
Selected Port: 1
Port
----
[S]elect Port No
[Q]uit to previous menu
76
Advertisement
Table of Contents
